Search:

Thanks for your information. I did successfully to do lock/hold print job using user code... And release document manually at copier.but when user print ,it directly go to copier without prompt...

Hi.. how to set up user authentication for color printing?anyone can help. User want print BW directly to copier but when printing color need to prompt usercode 1st to continue color printing.. is...

Solved the problem, registration roller problem.. to slippery. Thanks guys for your help.

thanks for the guide. i will try this step

Hi, anyone had counter this problem? the printing got some bold/jerking font when printing,intermittent only... not continuosly. can check sample print below as attached document. i do really...

Solved by replaced ITB. Ty so much

Noted.will try. Ty

Noted. Will try. Ty

Hello guys, my iradv c2220 had ghosting image. already do reg-clr,clean laser unit,clean patch sensor, remove all drum,itb,laser and do color mismatch and auto gradation. the problem still exist....

Before scan feature missing, i got some problem which is when i started the machine, the machine always shown ''connection to PC is complete'' need to restart a few times then the machine ok. That...

Ok brother, thanks for your support.. i'll wait for your information

I already take out this usb from another working machine with scan feature, but still scan feature cannot be use in that machine. Any suggestion brother?

Hi, guys how to restore scan function back?missing scan function maybe after i cleared ALL in sv mode. Anyone can help me pls

ok noted. i will try

[QUOTE=zoraldinho;741108]When do you have a problem when using an adf or glass?[/QUOTE

Using adf

Hi, what problem actually occur when i copy 1 or 2 sides, the doc image is skew as attachment below.. i tried to to enter factory value in sv mode, adjust>feed adj but still wont work. Is this...

anyone counter paper jammed and wavvy printing? help me pls

TQ all for the info.. i will try asap step by step as mention here

​anyone can help me... my iradvc5035 when printing 1sided or 2 sided, paper wrinkled. can see attachment below. i already check fixing unit, pressure roller and fixing film seem nothing wrong. pls...

Im using aftermarket drum n c.blade... sometimes ok sometime were not. I dont know why.. is there any adj in svc mode to init back the drum?

How to do gamma adj? I already clean the machine all duplex area and drum area. Dev unit seem fine, already checked.. this problem occur when i changed opc drum.

I counter this problem after change new drum and cleaning blade. Look like a transfer roller issues..but after cleaning duplex unit the problem still persist. Anyone can help me solve this problem 💆💆

yes..
ok.. i will try this. thanks 4 the info :)

What is that sir? I dont know... Sorry im newbie tech -.-
If you could help me on this, im really appreciate that...

I already test the HDD, swap with another machine.. work perfectly.. i suspected this prob occur within any PCB board, but idk which pcb board