Search:

Type: Posts; User: techie0419

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    588

    [Misc] Re: Hp laserjet color mfp175

    Might also be the fuser. If it’s a repeated image, all the same size & shape, at intervals down the side of the page.
  2. [Dead] Re: HP color laserjet pro M451dn dead after power surge

    I’ve never seen the type of schematics you’re looking for. Most times, when it comes to boards, they’ll expect the average field tech (or even mechanically savvy end-user like yourself) to replace...
  3. Replies
    0
    Views
    367

    [CQ] HP M477 undertone (?) magenta

    565645656356565

    Hi all. I have an HP M477 that does not like to print magenta very well when layered with the other colors. It looks fine on the supplies status page, where each color is printed...
  4. Replies
    2
    Views
    605

    Re: M577 not picking up paper from Tray 2

    Followup. I went back to the machine, and now it isn't even trying to pick up the paper. The rollers aren't turning at all. I had put a mark on the paper feed roller, and it never moved. Plus, it...
  5. Replies
    2
    Views
    605

    M577 not picking up paper from Tray 2

    Hi all.

    I have a large account, where they have a single M577 (along with multiple M477s and a variety of other desktop single- and multi-function devices as well as floor-standing MFPs of a...
  6. Thread: HP CP 1515n

    by techie0419
    Replies
    3
    Views
    500

    Re: HP CP 1515n

    Maybe the transfer belt.
  7. [Misc] Re: Part number found; not in manual -- M402/M426

    I just checked on the 426 that is on my desk, and when working properly, it does seem to be free floating, without a spring. Now, I have one of these parts that I ordered and didn't end up needing...
  8. Replies
    6
    Views
    1,068

    Re: HP M477fnw image quality issues

    I (like a few others) have replaced several fusers on the 477 and its printer counterpart the 452. The biggest trick is getting the side covers off. It takes a little more fiddling with the 477 due...
  9. Re: HP LJ Pro 400 M475 programming new Serial number and page count

    That's what I love about this forum. Information can be found, even several years later. I'm having an issue with needing to update the serial number on a M477--or continue to send in meters to my...
  10. [Error Code] Re: 60.00.02 no tray to paper lift, clunking noise

    Glad you figured out a fix.
    You mentioned the paper tray guide was hopping around. How was the tray itself? I've seen this happen on the older models (4250 in particular) with the clunking noise...
  11. Replies
    9
    Views
    7,717

    Re: faxes coming out landscape

    Hey,
    I'm dealing with this on a C368. I tried doing the ADF setup with the A4 paper, but it's still having the issue with rotating the faxes. I'm double checking the settings against another...
  12. Replies
    6
    Views
    6,794

    Re: bizhub c454 Jam Code 99-01

    Have you come across this bulletin? 43483
  13. Replies
    1
    Views
    4,482

    Re: How to print Total meter for bizhub 4750

    -Utility
    -User Settings
    -Printer Settings
    -Print Reports
    -Counter List
    -Print
    -Ok
  14. Replies
    2
    Views
    2,320

    Re: 20.0004 in error log.

    I've seen this same error on both a M426 and M477.

    The solution I've found (trial and error with HP on the phone the first time, but it worked in both cases), is to go to Setup > Service > Fax...
  15. Re: Konica c364e Scan to SMB not on copier display

    I seem to recall there's a way to decide which buttons appear on the display, and which don't. There's one machine I have that the address book itself doesn't show up, even though we can add...
  16. [Misc] Re: HP 602 usage page and configeration page different

    Wish I had a solution for you. But this is something I've noticed as well, with a few of the newer models, particularly the 602/605 types, not so much on the smaller models. The meter collection...
  17. Replies
    5
    Views
    5,302

    Re: Laserjet Pro M402dn false Jams

    In my case, the tray couldn't lift the paper, because the lever that shows the amount of paper was on top of the paper lift plate. Paper wasn't lifted to meet up with the roller; the printer...
  18. Replies
    5
    Views
    5,302

    Re: Laserjet Pro M402dn false Jams

    I just got a call for a machine doing this. It'll print fine if the tray is full of paper, but if it's getting low (25%ish or less), then it'll sound like it's trying to pick up the paper, but paper...
  19. Replies
    13
    Views
    6,308

    [Misc] Re: Getting black lines - Konica Minolta C224e

    When I looked at the image, my first thought was the black drum as well. It's hard to tell for certain whether it is a black line where the page should be white, or a blank are where there should be...
  20. Replies
    24
    Views
    43,472

    [Error Code] Re: Color laserjet pro MFP M477 59.F0 error

    I don't know what causes it. I had one of those errors on a 452 recently, followed the manual by changing the drum motor, no go. Changing the transfer belt fixed it. Just go with it.
  21. Re: HP M402 accordion jamming "in cartridge area"

    HA!

    First of all, I want to thank everyone who replied. Once I finally followed the good advice found here and stopped the paper in its tracks, I was able to narrow down where the problem was...
  22. Replies
    6
    Views
    3,441

    Re: BH364e contol panel

    I'm curious how it turns out as well. I can see it making a difference with boards or possibly even drums (although a black drum *should* work in both color and monochrome machine of the same...
  23. Re: HP M402 accordion jamming "in cartridge area"

    *Facepalm*

    MPT/bypass tray feeds fine. No crinkling, no skew...but we're back to an accordion when it pulls from the cassette tray. Base model, no extra trays. I took the front off, between the...
  24. Re: HP M402 accordion jamming "in cartridge area"

    Heh, I did. The cartridge that it had when it was brought back to my shop was so low that it wasn't putting an image on the page. New cartridge, there was an image on the paper, but it still got...
  25. HP M402 accordion jamming "in cartridge area"

    Hi all.

    I have a HP M402 here in the shop. When it moves paper through the paper path, I can hear it start to crinkle. It eventually stops in the rear door, at a slight angle, and accordioned in...
Results 1 to 25 of 36
Page 1 of 2 1 2