The motor change was DC Brushress Motor 40 for Bizhub 600 601 750 751 . Part number =
15AA80050.I change it because when you put the paper and close the cassette, motor was not running to bring the...
Type: Posts; User: noulaja
The motor change was DC Brushress Motor 40 for Bizhub 600 601 750 751 . Part number =
15AA80050.I change it because when you put the paper and close the cassette, motor was not running to bring the...
Yes the machine recognize the cassettes on the control panel.
Good day,
I have a problem with a KMBH 601, the machine can't print with the front cassette only bypass and large cassette unit (LU) are working. I change the motor in the rear side but no change....
Good day,
i'm urgently looking to buy a software module of xerox workcentre 5745; I'm LOOKING FOR software module remove from xerox wc 5745 because my printer is 45 ppm. Not need new one because...
Good day,
I'm looking for buy of two Flat cable of sharp mx-3501 scanner (AWM-20861-105C-60V-VW-1-F and AVM-2896-80C-30V-VW-1-F). Mouse was inside my copier when i check the printer after a E7-11,...
I'm looking for buy the konica Minolta bizhub 601
AOPNH01004 CONTROL BOARD ASBLY WITH the connecting cable.
Thanks
I have 3 cartridges, each cartridge is $20. I also have two used copiers konica 7022 if you need parts
Tray 1 and tray 2 are not working. The Large cassette unit is LC406.
Thanks
Only the Large Cassette Unit is working, all other cassettes are not working.
Any help? Thanks
I bought a second hand Ricoh MP6500, the problem is that i had problem to make a new configuration for printing with my computer. A message is seiing to see administrator because there was a former...
The problem have been solve. We replace the image controller IC-208
My Konica Minolta Bizhub 601 is giving message to lock the two front cover door. The two front door are properly lock but the message remain.
Looking for help
Thanks
Notice that is a 110V power supply
Looking for buy a power supply unit and memories dimm of Konica Minolta Bizhub 601.
when we power on, the led of main power is green and the led of START key is orange but the screen is dark. No fan start, no heating fuser.I don't know what is the problem? Power supply? Please...
Machine gone off alone when copying. Machine is too slow:mad:
Good afternoon,I'm talking about primary transfer unit but the SECONDARY TRANSFER UNIT (TR-803S). I need only the transfer belt (new or used) located in the SECONDARY TRANSFER UNIT.Thank's
Good afternoon,I'm talking about primary transfer unit but the SECONDARY TRANSFER UNIT (TR-803S). I need only the transfer belt (new or used) located in the SECONDARY TRANSFER UNIT.Thank's
The polygon motor is located inside laser unit. Open the laser unit and clean the polygon motor and put oil to lubrificate. I done the same operation with my kyocera km1620 and every is ok since....
Good evening;
I'm looking for buy new or used transfer belt of Kyocera fs-c8008 located at secondary transfer unit. You can contact me via mail noulaja@yahoo.fr . paypal payment.
Thank's
noulaja.
Good afternoon,
I check the scanner drive board (26NA-9052) and i' think there is a problem with ICP1, ICP2 and ICP3. If those elements are fuse, that mind that two of them are out of use. Can some...
Good morning,
I was trying to power up a konica 7020 but it showing a scanner error. The main motor in scanner is not moving at started up (i manualy move the exposure lamp but at start up the...
Morning,
I need to know if i can use toner of TK2OH or TK3OH to refill KM1530?
Tkanks
Jules
Morning to all,
I need to know if i can use toner of TK20H or TK30H to refill KM1530?
Tkanks
Morning,
I' need the Software Support tool( SST ) for Canon IR2200/IR3300 French version.
noulaja@gmail.com
Thank's
Jules