Search:

Hello.

I have a Riso EZ 220U that is jamming because the pressure roller solenoid wont release. I have checked all the timing and the position of the pressure arm on the drive of the machine and...

Thanks, to everyone for your replies. I worked on this machine yesterday. I dissembled the ADF original transfer assy, cleaned/lubicated the one-way bearing located in the assembly, and then put it...

Thanks, the ADF that I'm having this problem with doesn't mangle the original, but the original does stop at the white roller. Are you talking about the feed belt drive roller? I'm not sure which...

OK, thanks. I try that.

Thanks for all the replies. I apologize for the slow response to your messages. The jam codes are always 003 and 004. I can scan using the document server function as a test and get no jams. Does...

Thanks, I'm going back today,and will take my time, and check everything.

Thanks, Ill check/replace the torque limiter next. The ADF doesn't appear to have been damaged.

Good Morning; I have a Ricoh MP 6001 that randomly misfeeds. I have replaced the feed belt, feed roller, and the separation roller. Also i have cleaned all of the sensors in the original feed path....

Thanks; You provided me with excellent info. Ill probably try a mirror motor from a Ricoh MP 5500 and see if the SC changes. Also I'm not sure if this is the correct way to reply to your message. I'm...

Thanks, Ill try replacing the switches. Should I replaced all the door switches or the lower one only?

Good Morning; I have a Savin 8065 that has SC 202 displayed. I changed out the polygon mirror motor with a used mirror unit from a Savin 4060. The polygon motor from the 4060 was working when removed...