thanks shinchan, i managed to get the machine running after reconnected the connectors of the mcu. thanks once again
Type: Posts; User: pengtech
thanks shinchan, i managed to get the machine running after reconnected the connectors of the mcu. thanks once again
hi all,
i am facing an error code 045-368 on the dcvic 3371, the machine was unable to fax in/out before the error code appeared. i have no idea what's went wrong.
hope you guys can give some...
Thanks Elsab, I tried isolate the fax board and clear NVM but still the same problem.
With no other solution, I tried factory reset and it worked but with data all lost.
Hi, I am having an error 033-335 on xerox dcvc5575, any ideas to solve this problem. Thank you 🙏
Hi everyone, when l scan a document to the email in portrait position in the model DCSC2020, it appeared in landscape layout in the mail. I even selected the original size to A4 portrait, but it...
Hi guys, I have a printer docuprint CM305 df showing message to replace transfer unit soon. Do anyone know a way to clear or reset the message. Like it can reset the fuser message. Thanks.
Thanks copytech200X for your suggestion.
Today I did the initialize NVM. And the machine now is working fine.
:)
Hi guys, I have a APIIC 4300 that has blank print(totally blank) when photocopying. The other functions like scan to PC, printing from PC, internal test print, report printing, they are OK. it only...
Hi, I have a canon IR3320i showing jam sign at tray 2 once the machine is power on. I have changed 2 upper pick up assembly ( both tested OK before changing) . Changed the pick up assembly PCB. Re...
HI guys, having the error 027-513 when scanning to pc (smb) on apiiic4400.
anyone has any ideas on how to add user under start>computer>manage on the computer? Thanks.
Checked and found that the replaced laser unit is faulty also, but it was tested ok initially.
After changing another good one it's working fine.
Thanks for all the suggestions.
Thanks for the suggestions.
Will pull the copier back to the workshop for repair.
Will keep updated.
Hi, I have a canon IR2870 showing E0110-001. I have changed the laser unit and the DC controller but still same problem.
It can start up but once press start the error will appeared and the paper...
Try the iit unit.
Hi, I have problem on IR2830. The problem is when printing 2 sided, page 1 & 2 is ok, but the subsequent odd pages are blank and the even pages are ok. After the pages have come out, the copier still...
I have changed the main controller, boot rom and ram this morning, but the same problem occured. At last the problem is solved, the fax unit is faulty. Many thanks to you guys out there and...
No. Teckat.
Thanks Charm5496. I will to change tomorrow. Hope it works. Thanks again....
hi, i have a ir3300 hang up at the startup screen. After it finished the startup bar. It hang up with the message wait. I have changed the HDD, cleaned the boot ROM and SDRM, re-sit connectors. Is...
If you insist on the OEM, it is advisable that you use the same vendor/supplier especially the toner.
Wishing every members in the copytechnet, especially to the Chinese members a Happy Lunar New Year!!!
You should enable the size entry for bypass to ON in the custom setting, so once you put paper in the bypass tray, it will ask you to select the size. If not it will scan in freesize in this case it...
I agreed with Screwtape, try to clean the contact point of the BootRom or change one, if fail then you have to try to the HDD.
For E803 is something to do with the composite power supply (HVT) or the scanning lamp. Check the 2 ends of the lamp is it blacken? For E805 normally it will follow by a few number behind the code...
Check your scanning lamp. Is it light up during copying?