Hello
Good day
In this IC 409 you can also load the System Software with USB, but remember that the System Software version 1.0 is not compatible with the Bizhub 253/353
here is the download link...
Type: Posts; User: Walterj
Hello
Good day
In this IC 409 you can also load the System Software with USB, but remember that the System Software version 1.0 is not compatible with the Bizhub 253/353
here is the download link...
Hello
Good day
First, check the useful life of the charging corona and the developers.
Then check if the charging crown is correctly installed
Then follow the file steps I attached.
Luck
Hello
Good day
Actually, this error is quite common in the first Bizhub 227/287/367 equipment.
I recommend you change the FM2 cooling fan and check the ICP12E that is located in the MFPB, surely...
Hello
Good day
I tell you that is the information that Google gave, that is why that server can no longer be used because the less secure apps were automatically disabled.
The other option is that...
hello
Good day
Reviewing your impression samples, it is immediately seen that the transfer belt has a point and perhaps it has been caused by the small separating nail that it has, on the other...
[QUOTE = MVPunisher; 393227] Así que este es un tema divertido para mí. Quizás alguien lo haya visto antes. Solo tengo la bandeja 1 atascada. 11x17 se alimenta bien, todo el día. Aunque el papel de...
[QUOTE = altech; 460267] No sucede todo el tiempo, pero cuando se atasca fuera de la bandeja 2, hace un sonido chirriante y arroja el código de atasco: 20-02. Reemplacé el ensamblaje de entrada de la...
Good day:
Dear, I recommend you do the following
Correct the harness connection between CCDB CN5-SCDB CN5 if faulty.
2. Correct the harness connection between CCDB PJ5-SCDB CN5 if faulty.
3....
Good day
Dear, I recommend you perform maintenance on the scanning section, perform a test by scanning by SMB.
Then rewrite the FW to the G00-X8 version.
Modify Sw103 to 04
change it to the...
Good dayDear for you to correct your error C3B05 I recommend you to do the following
Check the fusing unit for correct installation (whether it is secured in position). If not, reseat it.
Ensure...
They already answered you, you have to modify the Sw227 to 80, so you must disable the option
Good day:
If you want a specific FW Base or FW Special, or any resolution of any error code that your machine may emit, you can only write to my email walvaradocruz@gmail.com
Regards.
Good day:
If you want a specific FW Base or FW Special, or any resolution of any error code that your machine may emit, you can only write to my email walvaradocruz@gmail.com
Greetings
Good day
Estimated according to your scan it is visualized that these marks are from the leading edge of the paper and it is very likely that it is your black imaging unit.
I recommend you take the...
good day
If you are interested in a specific FW Base or FW Special, a resolution of an error code on your machine, just write to me at walvaradocruz@gmail.com
good day
It is very likely that the error that your machine presents when printing is due to the PH Unit, I recommend you not only clean the filters with the pad, but also remove the PH Unit and...
good day
The error presented by your fiery must be due to the defective HDD, I recommend you replace it and load the operating system.
You can write to me at walvaradocruz@gmail.com
Greetings.
good day
When rewriting the FW it gives you the options to choose the languages you need to appear in the user interface (operation panel).
If you require any version of FW you can write to me at...
good day
If you want the solution of the error CD012 that your machine presents, you can write to me at walvaradocruz@gmail.com
Greetings.
It would be advisable to use the PCL driver and adjust brightness, contrast and saturation, all this is within the quality adjustment option.
If you want to use the PS controller you have to...
[QUOTE = Scarekrow; 1712971] Hola,
quiero que el escaneo OCR funcione en un c308, así que instalé el kit de memoria UK-211, verifiqué el estado de la memoria en el modo de servicio, lee más de...
[QUOTE=chennavijay@gmail.com; 1713147] anote el número de serie de m / c en el sistema 1 ......... !!!!! en modo de servicio !!!
SOLUCIÓN: Para corregir:
1. Acceda al modo Representante...
I recommend that you perform the physical and logical formatting of the SSD, you do that by deactivating the HDD first.
Then when you go to rewrite the FW select the Machine and Type well.
First I...
[QUOTE = dscmanga; 1712848] Buenas tardes. Tengo dificultades para configurar la impresión para exámenes médicos. Incluso al volverse negro puro, la impresión sale con tonos de verde que dejan el...
If you really want to know how to set these machines to 0 it will have a cost.
The solor equipment practically all have the same process in the monochrome equipment it is similar but other...