Search:

Has anyone had the service code sc 670-03 yet on this machine? If so did you just replace bicu or controller?

yes there are lights on the mfp and the start button blinks

I have one with a blank display. The paper trays will not lift and cooling fans run and will not print. mSATA was replaced and lcdv pcb was replaced. per tech help from another sharp dealer.. We are...

need part number for a lower developer seal sharp mx 5141. Thanks

Has any repaired the cracked base on this document feeder. The tech bulletin shows all the parts needed for replacement but it comes to around 700 bucks. 42.99 for an original sponge mat film and you...

I have one that had a jam code of 149 which is invalid main machine data setting. After that the jam code was 105 front jogger fence. The jam code happened on the same copy count. The machine would...

never mind I got it from Ricoh

Does anyone know how to get into the service mode on a m320f. The manual says ask supervisor. He is on vacation and I text tech support and they said I had to place a ticket on it. Just trying to...

Ok I found the problem with everything. The eprom on the BCU was causing all the issues. Cleared the sc220-04 and serial number reset issues. Once I installed the new eprom and set destination and...

I pulled the copier to the shop and started to look at it. I replaced the bcu and the copier came ready but eventually threw up a sc995-03 which is incompatible board. I switch eprom and same result....

yes I checked those connections as well. Plus I did firmware update. They called in saying they had a sc899. So I got the firmware and went. When I got there and turned it on the sc220-04 came up. I...

I have one with an SC220-04. It is a mpc 4504ex. I have replaced the laser unit and IPU board. Checked the serial number as per another post and it was ok. Anyone else have this problem? Thanks.

I went back yesterday with a new tray and paper size selection switch assembly I took off a junker.. After replacing both it worked. I am guessing the sensor was causing the problem and that's why it...

Have machine that jams a little out of the fuser right before the exit rollers. jam code is 31 for double feed. It will jam with one copy or multiple. The copier is not multi feeding. One thing I...

We had this problem and it was the ITB belt.

went back and updated firmware and replaced sensor and it took care of it. I did both at the same call so I am not sure which one actually fixed it. I am just happy it finally reset.

I have one the says waste toner almost full to call service. I replaced the disposal tank but the message does not clear. I reset the pm counters. Cleaned the sensor. I blocked the sensor with paper...

Never mind. They call it regiistration clutch and not paper feed clutch. Their picture is displayed wrong. It uses no c clip to stay on so it was misleading.

Does anyone know the part number to the paper feed clutch for Ricoh spc420dn or lanier lp131 color printer. I have looked and looked all thru the parts manual but I sure cant find it. Any help sure...

Finally got back to the customer to check jam code. The code is 61. Registration : stay. Sensor does not go off. I replaced the sensor and still shows jam. All the other sensors checked out ok. Any...

I am a ricoh tech. Just slipped my mind to look at the jam code. Like I said I am more used to copiers then printers.On a copier that would have been one of the first thing I would have done. I did...

I have one that says jam in A. I can not see any paper in it. I checked the input sensors in sp mode and all of them read no paper. I checked the door switches to make sure they were working to reset...

I got the machine fixed. It ended up being the eprom on the bcu board or just doing a memory clear solved it. I used a used eprom from another copier and had to do the memory all clear. After that it...

I replaced the tray lift motor. Thats what I thought it would be but no luck. The drawer was replaced also. Forgot to mention that earlier. I replaced the tray set sensor and same thing happens.

I have one that has a non paper feed jam 003. It will run 30 copies and then jam. Open tray one and close it to reset it and it may feed another 20 to 50 and jam again. This is what's been done so...