Sharp guy here.....
How do I get to lead edge adjust U402 on a printer only model?
TIA
Type: Posts; User: mansart
Sharp guy here.....
How do I get to lead edge adjust U402 on a printer only model?
TIA
That's it......Thank you.
Is there a way to disable the message that appears on the screen of the copier, that indicates changes have been made via web interface...blah blah blah?
The reason I ask is I have remote access...
Just spent 3 days on the Hotline replacing every board known to man to no avail.
Save yourself some trouble and start by disconnecting the pull out keyboard, I had a shorted "[" key
Thank you.
Sent from my iPhone using Tapatalk
I have 28 of these to install.
Is there a way to export smtp settings from one and move to another?
I would like to export/import setting so I don't have to re-type smtp settings 28 times
...
Soft Switch 114 Bit 8 from 1 to 0 will work.
There is a low voltage detected on the incoming phone line, which indicates to the machine that the line is "off-hook"
Soft Switch 114 Bit 8 from 1...
Make sure SNTP is off, NETWORK SETTINGS>>>SERVICES>>>SNTP
also make sure POP before SMTP is not checked NETWORK SETTINGS>>>>SMTP
U.S. Puts Chinese Company With Kentucky Ties on Forced Labor Ban List - WSJ
Sent from my iPhone using Tapatalk
Ventura 13.5 fixes the preset issue.
Sent from my iPhone using Tapatalk
At machine under “ document administration “ I believe
You tell machine to send a scan of everything scanned to a pre defined address
As an example….
So a scan is sent to bob@usa.com, the...
I have been using Liberty Parts for years. Just found out they are DONE, closing the doors.
Looking for a replacement vendor for HP fuser rebuilds and new.
Any suggestions welcome.
TIA
Don’t think firmware would be issue if 283 works.
If internal smtp…is there a relay set up for ip of 283?
Disconnect 283 and give other machine the ip address of 283 and test.
Sent from...
Not sure what you are asking.
Image file will be displayed on home screens regardless of which screen 1-x
Are you asking how to change icon’s?
Sent from my iPhone using Tapatalk
You have to create an image file and upload to machine. So logo placement is determined by image created
Sent from my iPhone using Tapatalk
Is the printed sheet the same as the scan or just a confirmation that scan was sent?
If confirmation there is a setting that can disable. I don’t remember exactly where the setting is. Check each...
Have you tried setting in the CUPS interface?
If not ...... on the MAC in question browse to http://localhost:631
In menu bar click "Printers"
Select desired printer.....then in drop down...
Anyone have any success printing to the new MAC OS with the newest Sharp drivers?
Both Intel and M1 chips
TIA
Warning—Potential Damage: Replace only one of the following components at a time:
•Control panel
•Controller board
To replace a component and to test whether the problem is resolved:
1 Replace...
I believe the AM10 is standard on the 70's in the US market.
Sorry I do not have the audio clip any longer.
Machine history indicates last tech there for the noise "lubed fuser pressure release" cams.
That was the last we heard about the noise.
Have you tried firmware via CN (emergency) method?
What is the IP of the machine?
Is it the 10.1.120.34? or is this where the data is coming from? We have to determine where this job is coming from.
Does anything show in the job log? If not look...
Have you tried to STOP.>START the app from web interface?
55723
From configuration window, when you set up the folder, what is the result of the test?
55724
Nothing on Sharp-Start about this.
I did find this .... may or may not help....sorry all I got.
900 Firmware Error Kernel Crash when the printer is connected to certain networks | Lexmark CS521