I have a CS 3510i that is giving me aC3300 code. U906 doesn’t reset it. I checked and cleaned the optics as well as the surface of the lamp. The lamp does come on. I have replaced the ISC PWB from a...
Type: Posts; User: Samanator
I have a CS 3510i that is giving me aC3300 code. U906 doesn’t reset it. I checked and cleaned the optics as well as the surface of the lamp. The lamp does come on. I have replaced the ISC PWB from a...
Message me your email and I will make arrangements to get that to you.
Thanks Billy but the two pages are pages 7 and 11 from the Maintenance Report. For testing this problem, I would print out two Maintenance Reports in a row and use those 22 pages to test this...
Lately it seems that the XPS drive that seems to be the resident print drive on Microsoft 10 and 11 just doesn’t work so well on large MFPs. And lately I seem to be getting more and more calls about...
This will be a long one as I’m stuck and more detail may help.
I have a 7003i that started making a broad line from bac to front on long runs of copies/prints (see attached PDF). Shorter runs...
This thread is very entertaining indeed!
I have been working on these devices since the early 80s. Its kinda fun reading someone making statements (that to me and in my humble opinion) are full of...
Are those marks only black marks?
Swap one of the other drums and see if the color of the marks change.
I had a black drum unit back up once because the shaft for the auger broke at the gear....
Recently I have had some customer complain that they cannot print form their phones to the Kyocera machines at whatever location. The machines in question are on a network that the wifi and hard wire...
Got it. Thanks
Would someone be so kind as to send me a copy of a Xerox Work Center 7855 service and parts manual?
Thank you very much in advance.
Thanks you. I didn't know the belt cleaning assy was a separate thing.
I have request a service manual.
I was told to go out to look at this Xerox 7855 (not my choice as we don't sell Xerox). I have never seen a 7855 and I don't have a manual. I was told by the customer (owner of the company) that all...
I do a search on eBay for 'Kyocera FK-6306 B Fuser Rollers'. The best price is to buy from China. I have done that but it takes a while before the parts arrive. Also, if something goes wrong, they...
Does anyone know the part number for the pick off finger in a FK-6306 B FUSER KIT?
I have found heat rollers and press rollers and it doesn't take me long to switch them out. I still have quite a...
The latest free Adobe reader sucks for me. Its the way it does searches and the layout. I don't like it. And yes, I know, its free and ya get what ya pay for.
I found an older version I like but...
Wow!!
Thanks so much blackcat4866!
And yes, changing the extension after downloading from .pdf to .xls worked just fine.
Good job!
Woo Hoo!
Wow.
I didn't mean to cause so much sh...dialog.
I think the simplest solution is to just add 'and Firmware' to Service Manual Requests. As I see it, one has to do the same thing for sending...
Thanks KYO_OEM.
Yes I have changed out he transfer belt early on. But what you propose is a little different. I will try it out.
Sorry.
Early in the morning I seem to not be able to type much less proofread what I am writing.
The model is a TS3552ci.
Maybe check and clean the charger roller and blank lamps.
As there is a Service Manual Requests area, maybe there should be a Firmware Requests area.
Just a thought.
Just before the new year I went out to a customer that called and said the machine has a C7901 (Drum unit K EEPROM error). So I went out taking a DK-8550 drum unit just in case.
When I arrived I...
I had a problem with the Mac driver on a customer Mac a few years ago. The customer was a friend of the owner as well as a lawyer so I had to get this working for free. I had to figure out where to...
Thanks KYO_OEM. I didn't know about U411 and U415. I will incorporate this into my setup.