I can't see well....but don't you have a better photo?...at least describe the defect.....mannaggia'a maronn!...LOL
Type: Posts; User: luca72
I can't see well....but don't you have a better photo?...at least describe the defect.....mannaggia'a maronn!...LOL
I'm not sure, but I seem to remember that the LTs are those with a different cpu/chip from the standard one, due to the "alleged microchip crisis"... if this were the case, it requires special...
there isnt bullettin about, the procedure is on the manual, preferably first of replace, you must go in sp mode and put to 1 the sp3-701-* , and reboot the machine.
*=interested unit for replace
download part finder or old part catalog, they are better than manuals...with the drawings they have been making on pdf for a few years, i can't understand un cazzo.
I didn't read correctly that the fuser was changed, it's almost certainly what slimslob says
now that I am reading your request, I am at home, and I do not have access to the documentation, however, if you are in a hurry and have some machine or printer retired for end life, only must be of...
follow this attachment (62375).....seems like the same thread as a few days ago(?)...LOL
This is how I solved it on the phone a month ago... except unplugging the network cable
well... if your problem its the privacy...you could also attach a counter page! so i have to guess.
I'm betting on the film on the sleeve, which has lost its non-stick coating at one point (as long...
I tried to remove the SD card, and the scanner and printer do not appear, with the card inserted the scanner works, and the settings in user tools are there, they are only missing from the web
thanks friend👍...we no longer have that model to be able to verify, I hope it's the corrupt firmware, I'll let you know as soon as I go to that customer with the SD and romdata modules.
Hi everyone, I'm asking you for confirmation, now I'll explain what happened to me:
I went to replace the hhd of this mp9002 for the second time, which the first time gave sc672-00, ok fine
then...
usually when the machine eats up the toner, you have to replace the pcdu of that colour, it happened to me a few years ago on mpc2003 with yellow, (I had also opened a discussion here) I recommend...
you can notate bad hhd when you load the address book in wim, that load very slow, anyway a bit time ago , sc672 by bad hdd its happen also to TULIO here.
it happens every now and then, last Friday mp9002 sc672 replaced hdd.
a month ago mpc2503 sc672 replaced hdd, and others that I don't remember, a good way to understand it is the speed of access to...
replace the hdd for first thing
it's the first thing I did, and I found solutions like "turn it off and on" or "unplug and plug in the formatter", but since the customer is very far away (it takes almost a morning) I would be...
Hi everyone, I usually stay in the ricoh/lanier/gestetner section.
we have this customer reporting this problem on that unit
(61.00.03) print head error (on display)
I'll start by saying that...
I advise you to remove auto-select by selecting tray 1, and to store the condition in delfault mode in the "program/store" button, the one with the memory symbol (the diamond), and set drawer 1 in...
finding the right diameter, you could try cutting a piece of those insulating foam rubber tubes, which are used to prevent outdoor water pipes from freezing....but that's fine.
62268
[SOLVED] it was just that stupid gathering roller that got soggy, replaced with AF03-2094, thanks for your cooperation
622346223562236
I think too, it's a problem that also affects internal finishers, which use that replacement, which is also quite expensive (32 euros!)
....I don't understand why they insist on using that...
Hi everyone, tomorrow I have to go and look at this problem, the machine was recently installed, and I checked both the machine and the finisher carefully before delivering them.
the customer...