Search:

Hello,

I can't see the video, but a long ago I had this kind of problem with one of my RP3700 and it turned to be the paper feed clutch

Hope it helps,

Hello,

I'm using a RP3700 with a W2k virtual machine under W7 and a serial to USB interface.
At the begining I experienced problems similar to what you tell. There are some threads on this topic,...

Hello,

What I can say is very obvious, but this happens in my machines (RP3700) when I have bad ink flux, normally due to a cogged ink filter.
Did you disassemble the whole drum, or only cleaned...

Thank you ddude,

As I told you, I'm not sure if any of this options suits my needs... and my skills!
Thank you

Thank you ddude!

These are very good news.
I wait

Thank you very much, jermyth

I've seen sometimes a RP3700 selled with a SC7700 so I understood they were compatible. I know compatible is not the same that "can work", so your advice is...

Hello,

I'm looking for a SC7700 for a RP3700.
Since it's very difficult to find one, I'm thinking about purchasing a GR machine that include it as they are more available.
Are they compatible?
...

Thank you jermyth

Yesterday I checked it again; if idle mode is selected then my machine does three masters when sending a file from the PC (no multiple pages selected). Without idle mode, then a...

Gracias slimslob.
A veces me he encontrado con que el traductor de google no interpreta bien determinado vocabulario técnico o jerga de una especialidad.

Mientras lo pruebo (y compruebo que...

Hello,

Please, excuse my bad english.
I've using a RP3700 for some months.
I know that sometimes when making a master more than a master sheet is used if the master secuence is interrupted, as...

Hello,

I've been suffering this problem since I got this machine some months ago, and I think I finally solved it.

New paper feeded ok, but paper previously printed tended to feed about 2/3 on...

I'm sorry.



I've experienced some of this problems before, I feel this is different. Almost no ink, and far from the edge. I finished to print it in another RP and everything worked ok. Not a...

Hello,
please, excuse my poor english

Thank you for your help
I'm also experiencing this problem in my RP3700.
It happens more with light paper, more in the second pass/face, and at low speed. ...

Thank you,

Yes, just the speed buttons in the machine.
I also thought it to be related to the timming, but checked it and seemed ok (I could be wrong, no experience)
I examined the options in TM...

Hello,

Please excuse my bad english.

I had this problem in my Rp3700 some weeks ago. The pickup roller and the feed roller took the paper ok, then it seemed to stop in the second feed section...

Hello again,

Seems that it is solved by now.

Yesterday I made some experiments with another RP3700 and another USB conversor.

Now it is working Ok... Not sure what happened but it seems it...

Hello,

I,ve just arrived to Riso world, so my opinion may not be considered.

I'm using a RP3700 connected to a Win 7 PC running a virtual Win2000, without a RIP, with a USB to serial converter....

Thank you all!!

Very glad to be here

Please, excuse my poor english.

After a long wait, I recently got a RP3700. Everything seems to work fine except the common problems (feeding, inking, etc) that i'm solving with the help of this...

Hello,

I've followed this forum for some years ago, while trying to find a Risograph.
Finally I've found one some weeks ago, so now I've decided to join you in a more active way.

Thank you...