Search:

All this has been done from the beginning, in fact, the controller cover is still open, today I even reformatted HDD to RAW and installed and tested it,

As I said earlier if I could connect a...

Initially, the machine had g00 20, so I downloaded and downgraded the firmware to g00 20, but there was no sign of a connection, then I tried the controller recovery option DIPSW 4.0 t0 1 but it was...

The wires were replaced with new 1GB patch cord also new a display cable
As the machine was down for more then 3 weeks customer reached out to another technician who asked him to format the HDD...

I have tried as per the above direction, but even after enabling the recovery mode (DIPSW 4:0 to 1), ISW mode does not highlight the P0 to P5 to press in recovery options. pls see the attached image...

I downloaded the firmware, but I'm not able to load it into the machine as the controller shows unconnected, even after several restarts it does not reach to "now initializing" state for me to update...

Thank you, will load this firmware shortly then keep you posted

G00 50 for C4070 firmware has been loaded into the machine, and the Controller IC-609 firmware has been downloaded, but as the controller is unconnected the machine cannot detect the controller...

This is not a Fiery Controller, IC-609 is a Konica Controller, it does not have the option to reinstall as we do it for Fiery

No, it's not reachable through the network as well

I'm experiencing a connection issue with KM IC-609 to the machine Controller, it shows unconnected and all the admin and service mode functions are inaccessible.
Initially, the client said that the...

Hello,

We have supplied Press C 1085 to one of our customers like 2 years ago, ever since we supplied this machine and when the DRUM unit reaches between 40% - 70% it brings this code of C-2731 ,...