fuser squealing only when copying not during idle
Type: Posts; User: Kent
fuser squealing only when copying not during idle
fuser squeak when copiers idleing, lube fuser drive bushings try lubing cleaning roller bushings next, any other thoughts
Got there this morning and lines were gone ran some tests asked users and it has been fine,,Im not thoroughly convinced will wait and see
47765here are samples
they came out with a new style scanner belt the ends were brass new ones stainless, changed the belt slightly
random C 9401 codes, it may go days w/o erroring did update firmware, it probaly exhibits itself more as an internal error,, thinking lamp first, otherwise things could be expensive
Ill post samples after the weekend
black line shows up on everything
getting a random black line running top to bottom on letter portait, it goes completely edge to edge and not in the feed direction, all the consumables are at 50%, line was noticed when printing but...
getting random C9401 codes, seeing in trouble history, other day scanner was disabled, turned off and on everything restored and works, the code is inconsistent, I see exposure lamp and CCD as...
manual refers to changing right side door of the stacker, going to go ahead and order one
is the fan part of the right stacker door
has a 66.80.17 error tried turning off and on, checked fan in door for blockage, one of the other solutions I saw said replacing the stapler stacker right door assembly, any thoughts
tried removing the network connection, and restating to no good, tried unplugging letting rest and then plug everything back in, still nada
C 3100p stuck in initializing
have a okidata 8473, with a please set next document under the status button, if you try to copy says device is busy, only way i could get rid of please set message was to turn off copier and...
make sure paper is loaded in tray 3 correctly, go to tech rep system 1 and initialization tab bottom left system error clear
i