Search:

You can find the IP or specify DHCP/static with the below setting

panel settings > wifi > select network > select show advanced options

not to be that guy but there is more to subnetting than just a class C subnet.

snmp? can you give more info on the process of adding the print queue, where it fails?

The slaughterhouse i used to go to had a trailer outside that they fill with all the guts, horrendous smell of course. Never had to work on any of the copiers, just uplift/install a few.

These new "i" devices have a few extra features turned on, the above being one. Also recently had to install Papercut and these have all sorts of new web browser security settings that need to be...

One of our service guys recently told me that Ricoh UK's recommendation with any fault on these boxes is to now replace all the toners first before doing anything else.

My guess would be Chrome. We've had issues recently with a client of ours using Edge.

Adding LAN ports to Wifi point - Google Wifi Help

This suggests the primary point will have a LAN port.

Otherwise buy a cheap wifi antenna and connect it to network then connect it to the...

I posted about Netaphor Site Audit in this thread, it supports usb connections apparently

print volume reporting solution for USB connected Ricoh printers

vodka? its drank too much or needs more?? :p

Have you tried putting the device on DHCP, let it pick up a new IP and test?

Strangely i have had this work before.

My lT classes at high school were mostly spent playing this!!

I have setup a KM before to poll an inbox every minute and print any emails received.

Yes all the time and it usually comes down to firmware levels on the device.

If i remember there is a workaround - when adding it to the DS set open api to true.

everyday is a school day!

Try setting up scan to email rather than webdav?

We have clients with KMs/solutions and i only remember them using scan to email/folder.

I will do this tomorrow morning as i need to test extracting data to an xml file for a proposal.. sounds fun!

Where on the device did you install Sharescan?

I recently found that when i was installing VDMS (Pcounter embedded) on an IMC that it would only work if installed on the SD card not on the HDD.
...

We have an internal bulletin that says to replace the motor as it fails under load.

Its most likely just a ripped belt, best to go see the fault before thinking about the worst case scenario.

If he is using SOP Wifi then this only supports printing to the panel, the device itself is not networked and network scanning will not be available.

Scan to usb stick is the easy option.

Have you checked it has WSD enabled?

Are you meaning Windows self discovery?

Try

printer features > system > letterhead setting > always on

This setting may be for double sided letterhead printing.

Correct, see How to set up a multifunction device or application to send email using Office 365 | Microsoft Docs