I have 3 different fusers
Type: Posts; User: DheerajBE
I have 3 different fusers
thanks for the guidance, is there any particular nvm that I have to change?
In my Dc 550 fuser is not printing on plain A4, I tried increasing the paper weight to HW 1 but same problem
It is only printing on HW 2-3 but plain paper is jamming in HW2 HW3
I have cross...
attaching the screenshot it tells me to check the nvm location to identify if the problem is hardware related or software related.
pls go through and pls advice if I am missing something. In my case...
I checked the fuser is working Fine in another machine.
in my machine fuser is not heating lamps are not blowing.
and edocs tell me that is a software problem but I reloaded the software but not...
Hi experts
my versant 80 press giving error code 099-353
I tried resetting the nvm but failed.
as per Edoc I reloaded the firmware but no success
pls help
Hello all,
anyone here with EX80 fiery software and nvm s/w access tool?
I can share other models software in return
Dear all,
I am looking for xerox versant 80 nvm s/w access toll and ex fiery system software and user software. In return I can share other models software nvm access tool and fiery software and...
yes, the exact nvm chain link I don't know. Do you have any idea my friend?
My Xerox C60is changing color when I am printing more than 50 pages job. The last job is lighter as compared to first copy.5612356122
ghosting can be due to following reason
Drum unit
fuser unit
toner
toner impose (needs calibration and color correction)
edocs are available
Hi xerox techs.
does anyone one about why the xerox ftp link for FTTP://89.168.62... something like that is not opening, is there any there any other link for downloading software?
Please help.
cross check all boards and wiring if all is good and machine still not working then try one thing, open all the doors of machine remove all toner cartridge, open all trays (drum, ibt, transfer unit...
There is no operating sound from machine or i can so no blinking led in any of ess or mcu board. Machine is dead and silent.
cross check power supply assembly, MCU board , MCU PWB , ESS board, ESS PWB.... if all good then try open all door of machines open remove all toner cartridges, pull out all drawer of machines...
[QUOTE=Phil B.;744225]sounds like the CRUM reader INSIDE the printer is failing...
if your going to go in and replace that one.. replace ALL CRUMS...
have you made sure the DEV unit is getting...
I have a xerox dc 550 which is not powering on.
i checked/replaced following item.
power supply assembly, MCU board, ESS board.. all three are cross checked in another working machines. please...
I have tried to send print command as heavyweight 1, label 1, coated 1 also tried coated 2.
anybody can give solution please?
i have xerox dc 550 giving error code 061-343 i changed both laser and cable complete set.all drumsall developers what can i do rest.
Dear All,paper jam with error 077-107 in right exit door. it happens with only printing on label stock only ( when i hit blank copy paper is passed out no issue ) but when i print it stucks (label...
It looks like one color is missing say yellow.
go to diagnostics and print test pattern yellow and other colors too. i hope you would find the solution.
check all consumables (drum, Developer unit,...
Thank you all,
It was due to bad drums and developer assembly.
I had to change drums and adjust toner density in developer unit and run registration setup unless it comes to OK
I forgot to mention but ros are clean