Hello,
our Kyocera 3051ci leaves magenta streaks on paper, sometimes on the front, but sometimes also on the flipside.
The drum cleaning program sometimes(?) fixes the issue for 2-3 pages, then...
Type: Posts; User: stern.detmold.32756
Hello,
our Kyocera 3051ci leaves magenta streaks on paper, sometimes on the front, but sometimes also on the flipside.
The drum cleaning program sometimes(?) fixes the issue for 2-3 pages, then...
Thanks! This worked, changing the ADF unit actually did nothing.
Could you guide me to where I find said error log? I did find several status reports and the event log.
We have a Kyocera 3500i that says "document feeder cannot be used due to failure". The copier does not take in the paper at all.
Flatbed scanning works without problems.
Is replacing the ADF...
Hi,
no I'm not ignoring the responses, that problem seems to be linked to the settings of the copier, as it was fixed by the tip of changing the settings.
The other printer only had problems...
Our Taskalfa 300ci misses color in vertical lines when scanning. The problem occurs both through the feeder and the flatbed.
We have cleaned the glass thoroughly and prints are just fine.
...
Different scan settings worked, but it does not seem to save the settings and revert back to normal after copying.
I have tried copying the font list in a 45 degree angle and the image was...
Our Taskalfa 5500i copies patterns into documents, very visible on the "Internal Scalable and Bitmapped Fonts List".
It kind of looks like a camouflage pattern.
I tried cleaning the glass but it...
The copier has printed 301220 overall, 108378 b/w, 192842 color and I don't believe anything was changed yet. We have run the refreshes and calibrations multiple times without any significant change ...
We have a TASKalfa 3550ci that is printing lighter areas (example in blue area).
When printing orange text, the text within those lighter areas is printed in magenta.
We have run the service...
We have a Kyocera FS3920DN with a broken LAN-port (It works but it doesnt grip the cable anymore).
We also have several Kyocera MDK332V-0 network cards. They fit and blink when installed, but I...
Hi everyone, the customer called me today and the problem disappeared magically
Thanks everyone for help :)
Thanks to everyone, i will verify if it was printed LEF or SEF, my guess was the drum actually. The total counter is 151065, coloured is 102343. I will let you know what i did and what fixed the...
Hello everybody,
i have a Kyocera 3051ci which prints a blue haze on every print which is coloured. If it is a black/white copy, this problem does not occure. Example is attatched. I already used...
Hi everyone,
i have a Kyocera Taskalfa 3550ci, wich produces a paperjam randomly after a few pages. It is moved from the paper cassette like 1cm into the transer roll unit, but it nearly doesnt...
Hi everyone,
i have a taskalfa 3050ci which leaves a light, dark shadow on every printed page. No difference wether i print a status page or just copy an empty white page. Has anyone a tip what i...
Hi everyone,
i have a Taskalfa 3050ci which prints yellow dots all over the page. I did all cleaning programs, no improvement at all. What can i do? Many thanks in regard. 42160
Hi,
i have a problem with a Kyocera FS3920, as shown in the picture. I did clean the printer like described in the manual, and used the drum cleaning program. Is there a possible solution besides...
im afraid im not the printer-expert, so, with e-stop you mean emergency stop, like, disconnect the power cable? And what do you mean with "image on the drum"?
Hi,
i have a problem with a few Kyocera FS-3920DN-Printers. As you can see on the status page, there appear small stripes on the page, expecially on horizontal lines. I used the drum cleaning...
Hey everyone, i have an kyocera mita 3550ci which leaves a bright line on the right side of the page, like the paint isnt brought on the page properly. The line is straight from top to the bottom of...
Hi everyone, i have a few copy machines that print spots in one line, everytime on the same spots on the pages. is it a drum problem maybe?39267
I had both, normal and (T), it all worked perfectly like you said. If you have the problem "Maintenance cassette", do U251 reset too :)
Hello everyone,
i have one Kyocera Taskalfa 3500i, which says "Time for Maintenance", also i have a Triumph Adler DC2445 with the same problem. Is there a possibility that i can erase this...
Thanks so far for your answer, here is an example image.
Are the Drum or the Role changable?
39212
Hi everyone,
i have a Triumph-Adler DC2445 which leaves small black dots on the printed sites. I already used the Drum-cleaning program several times, but without any Effect. What else could i do...