Hi,
I have a Versant 80 with a Fiery 80EX-i (the embedded one), and the Fiery will not start up.
(When I connect a display to the Fiery I see that I have disk error)
Does someone have system...
Type: Posts; User: Ragnarsson
Hi,
I have a Versant 80 with a Fiery 80EX-i (the embedded one), and the Fiery will not start up.
(When I connect a display to the Fiery I see that I have disk error)
Does someone have system...
It was broken in one of the upper connection between machine and FWA,
like someone has forgot to unplug before taking the machine apart.
Bjorgvin
- PROMBLEM SOLVED -
This was broken wire who caused all this.
Thanks all for your help
B
Yes we have measured the 220v and that is OK
What we have done so far
- Checked all connectors
- Swapped the Low voltage supply 1 and 2
- Checked all the connectors.
- Checked all fuses that we saw
Best regards,
BRR
Hi,
thanks for you reply
Status
- Display is dead
- no lights on the ESS board
- no fans
- no sign of live unless the small green light next to the display on FWA
Best regards
Hi
thanks a lot, can you explain how that is done?
Best regards,
Björgvin
All plugs connected and tested, every switch checked and rechecked
Best regards,
B
Hi
I was relocating my Xerox V2100, and now the machine is not powering up.
The green press status light is on, but the initial display is not turning on.
Any ideas?
Björgvin
Hi
I have sent the file, let me know if this works
Best regards
Björgvin
Ok
send me your email address, and I will send the file on Monday (i am not at the office now) to you via Dropbox (or similar)
Best regards,
Bjorgvin
Hi
I do have FFPS 8.0 sp2 Dc 770 full software image 301E63272, that is FreeFlow 8.0 for Xerox 770.
But this is useless unless you have valid license
Best regards,
Björgvin
We did try alcohol, no luck
We did look at this though a eye loupe. Crisp text (very small dots)
and yes, there is no way of the laser doing this
Ok
Some more info:
1) This text is from earlier job wich was printed on 170 gr. UPM coated paper
2) All genuine parts and toner
3) No label has ever gone though this machine
I have never...
Hi,
I got a strange problem, it seem that somehow a part of text got stuck on the IBT belt and you can't wipe it off. (see image)
The text is very sharp and it look like it is written by laser....
Hi,
I am trying to update my Xerox Freeflow Print Server with the update manager, and I always get the error:
"unable to connect to Xerox server. Please check your network settings, DNS and proxy...
It seems like you are trying to connect a display or mouse without the pro dongle
Do this:
Start up without display and mouse
Connect to the rip with RDC
make your adjustments
Start printing...
Hi.
I dont belive that you need the system disks, I don't have them and I never had them.
The restriping is only for the image disk (I belive) the system and all the backup info
is on...
Hi,
Restriping is the correct way, then do a restore.
Björgvin
Hi Viaros.
I got a PC specialist, he rebuild the Raid controller (this is something quite common with RAID controllers)
After that I did a full restore, as described in the user manual.
...
Hi.
I know that I can replace the LCD display, I was just curious if someone found out what was really wrong with the display.
(foulty board, some connector or...)
BR
Hi everyone,
I have a DC 250 wich sometimes will sometime not start up the UI on the machine ( Large LCD display on the machine), sometimes I need to start the machine up to 3-4 times until it...
Hi,
after cleaning the machine inside and out, and clean contacts ( thanks xcopytech) the machines start working.
:)
Regards,
BRR
I have tried to swap the drums, and replace hot unit. This came over night, no paper jam or any thing involved.
Best regards.
B