I've had a couple where the exit turnover gate sticks. Not too bad, remove fuser then 4 screws to remove exit/turnover gate. also remove top cover once you pull the back away it comes off. 1 screw to...
Type: Posts; User: TRJS
I've had a couple where the exit turnover gate sticks. Not too bad, remove fuser then 4 screws to remove exit/turnover gate. also remove top cover once you pull the back away it comes off. 1 screw to...
Same as BH C280 you will have to cut off some of the front cover on drum to make fit. done it many times.
MFX-3535 Failed to save the storage. checkout error Device 05,Detail 00000001,Data 025 Rom Version H5A0A0 tried a different SDcard same thing. Can’t find anything in manual on code. When I check...
Customer just purchased a C550i latest firmware KJ with memory board version 2.2. General manager has macOS Monterey 12.1 on laptop. I don't see a driver or any bulletin on Konica One Stop Product...
Probably toner pump
clutch that lifts carriage is dirty/bad. good luck with it. You might be able to clean with a can of Electronic cleaner. Getting to it is another ?. I have fixed it this way though.
I believe you can. I have a customer that we have to change soft switch to make machine look like a KM. same firmware. Equivalent should be BizHub 364e.
Need part # for controller board Thanks in advance it has 672 codehttp://www.copytechnet.com/forums/images/icons/icon8.png
If you got 150k out of fuser you're lucky. Had fuser gear break many times. Exit/turnover will get brittle and break also. Keep filters clean/remove.
Finally, my email worked! looking foreword to helping/getting answers to the problems we all come across in our line of living the dream.;)