Juat removed the paper didn't go in there. I'm wondering if the 2nd BTR might not be going back into the home position
Sent from my SM-G780G using Tapatalk
Type: Posts; User: positiveg
Juat removed the paper didn't go in there. I'm wondering if the 2nd BTR might not be going back into the home position
Sent from my SM-G780G using Tapatalk
Hi therw guys. We been getting this weeor 077 122 jam. Not sure. All the printing now jams there
Anyone can provide any assistance. Checked to see if there's any loose paper anywhere close but luck...
Yep see a bad fuser
Sent from my SM-G780G using Tapatalk
Can we see aome photos?
Also the fuser could just be bad. But if you can provide some photos.
Also what kind of paper are you using?
Sent from my SM-G780G using Tapatalk
That is a very good question. Because I too have only ever had it with cyan. Like it would just happen.
With my c75 certain things too happen with my cyan laser where it tends to get diertier...
Well I guess I didn't really change the cyan drum.
I did so and guess at the marks disappeared.
Firstly I switched the cyan and yellow drum and I saw the marks but in yellow. Now I'm changed the...
Hi all. Ok I change the cyan drum but in a new drum and also change the magenta drum because was getting aomw magenta hues. Had to do a few prints to clear the hue and before the colur started coming...
I'll give the switch
Sent from my SM-G780G using Tapatalk
Results were still the same.
I've installed a new drum. Will try another drum.
I dint even see marking in the cyan so could have said it's the cyan. But thanks will try again
Sent from my...
I've installed a new cyanbdrum. Even switched around the drum to see if a different colour would show up
Sent from my SM-G780G using Tapatalk
Hi guys, I hope all is well.
I'm getting some weird marks on my prints. It's a cyan print. In the exact clsame area. Looks like it can be coming from some roller or so, but I'm not sure where. It...
Please take a look at this.
The cmy developers are over 80% with the black at 54%
The drums are all over 90% but the cyan at 24
This was not happening before I juat topped up the cyan developer...
Hey there all. Hope everyone is well.
We have a Canon pro 4000. For some strange reason it's giving some issue with cyan/blue shades of gray prints.
We thought maybe head wanted cleaning or...
Good day a friend of mine is having some issues with a Canon 5530 printer. These are the errors he is getting
Can someone advice please thanks...
Thanks I did bring in two drums replaced the Y. So when I get the C developer powder I'll try the cyan drum. All rhe developers are practically new as in replaced in last 6 months. Printer hasn't...
All the best with these. Let us know how they turn out.
What will you with those you are able to repair successfully, sell on eBay?
Sent from my SM-G780G using Tapatalk
Will forward those tomorrow.
However the only one that was off was the cyan and it looked like the developer in the unit was running low.
And I meant using rhe wand to clean the lasers.
Sent...
Hi all hope all is well.
Getting this light print top half of paper. Not aure if it's a drum issue but I've cleaned off the lens and still the same. Attaching a preview....
Hi there uys hope all is well. I've changed two fusers out in leas than a year for the same issues the sleeves end uo getting scratched /marks and then putting marks on prints and we are unable to...
I've switched around the drums and image got worst. So like the magenta drum is even worst than the yellow.
Refusing to believe that both drums are thay bad.
Sent from my SM-G780G using Tapatalk
I will swap the drums out. But yes when magenta drum does need changing but only yellow is giving any kind of major marking ao I'll swap the yellow drum around and see thanks
Sent from my SM-G780G...
Hi guys hope evwryonebis good. Now I've been getting some really bad prints from our 453. I was thinking it's the yellow developer. We bought a new one and installed UT but still getting bad prints....
I have another transfer belt. Thanks I'll give it a try and see. Just need to get rhe tech in. We have a Xerox C75 and I can usually change that belt by myself. This 454 it's harder to get to and...
Yep several times
Sent from my SM-G780G using Tapatalk
Hi there guys. I'm getting some bad prints from the c454. I thinking could be yellow developer unit but I'm not sure please take a look.
I've changed yellow drums. I've ran the printer without...