052 .205 firmware in display
Type: Posts; User: yormets
052 .205 firmware in display
Have a lexmark that was turned of and back on. It never gets past the Lexmsrk logo on the opening screen. The firmware version CXTPP 252 052 is in the upper left of the display. I have downloaded the...
I have a customer who prints on letter size labels. Have been using an HP 4250DN printer. Lately even with a new fuser we are getting incomplete fusing with white specks in the blacks. I have tried...
So the best scenario is to save the chips from a used empty cartridge and tell the printer to ignore the low toner messages?
Is it possible to get an HP 454DW firmware downgrade to restore a printer to pre firmware upgrade that doesn't block generic cartridges? Is there anything else that can be done? Resetting to factory...
That's what I used to say until I got 66 years old. When these machine finally quit, so do I. Until then , thanks for the advice.
Anyone else struggling to get the copier to recognize the black toner cartridge. I am using OEM and have two machines in the same location doing it. Any ideas?
I looked it up in the fax function manual. Thanks again. I knew there had to be a reason. I am going out this morning to solve it. Funny how many very experienced techs had no idea what was the...
Thank you very much.I guess it is set in the functions mode somehow. Or is it under an 08 code? I knew there was an answer.
Thank you very much.
Been renting the 3040C and the 3540C machines for years now. Very few problems. Drum units go bad. I just purchased some back up parts machines and have made a fortune of those Toshiba's. Sorry to...
Is it possible to purchase a cleaning blade for the transfer unit for this machine. I have one that is failing. The belt assy looks fine. Can't find a part number for the cleaning blade on the...
Yes there is an OEM toner in the machine. I will go back today and print out the 08 code settings. If worst comes to worst I will try and find an extra feed drawers unit for it to get to two...
I will print out that list. If I have LT in tray one and no other tray set to letter, no paper on the bypass. I place letter size on the glass. Select tray one and press copy, nothing happens. It...
Yes I set up the drawers using the function settings key. I tried all the different sizes in tray #1. Right now I have LT-R in tray one and LT in the second tray. The only time the machine ever...
I will go back and print out the config page.
This is a second install. Machine only had 700 actual copies on it. Has the extra 250 sheet tray to make two trays. I can select and put the paper size in either drawer. But the machine will never...
I have found troublesome CA00 codes are from the transfer belt sensors. If the problem doesn't go way after you diagnose which color band on the transfer belt is faulty, and fix that. Clean them...
Upload the config pages. ??? From the copier by IP address?
If I put letter in both trays select tray one. Put a letter size document into the feeder, it pulls it in a switches to tray #2 lettersize. It will not copy from tray one no matter what size or type...
I am simply printing a test page from the printer properties from. It is letter size. The print driver would have nothing to do with the fact that the copier function will not copy from tray one. The...
I installed a near new machine with less than 700 copies on it. I cannot get it to print or copy from tray one. The machine has two drawers and a bypass. The machine recognizes if there is paper in...
I am in Phoenix Az . Does anyone know anyone that can set up scanning on a W10 server network for a CS 4551?
How can I set up the MFP to default to printing in B & W?
It is networked with a server and several work stations. They just want it to print in B & W when people try and print to it.
...
Thats what I thought too.