I probably have a problem with the serial number because it tells me by entering the token code:
serial number error
I checked but the serial number matches P
robably some card has been replaced?...
Type: Posts; User: enricocopyline
I probably have a problem with the serial number because it tells me by entering the token code:
serial number error
I checked but the serial number matches P
robably some card has been replaced?...
yes yes I did everything right in LMS
it doesn't even give me the repair button in the services,
do you know why?
it is a license that I transferred from one Konica to another
I generated the license code in LMS by deactivating it
from the other and generating the new license code and function code
Good morning I have a problem installing a PDF/A license on a Konica Minolta C258
when I go to apply the license from service mode... stop 9...
I enter the codes and it says UNABLE TO CONFIRM...
I use compatible toners and would like not to always have the compatible toner not recognized message
I have a problem with Canon compatible toners with the C1127i multifunction but also with the Canon MF453.
the problem is that they detect the compatible toner, always giving me the message when I...
I have a problem on a Konica Minolta C554 in the first print and ONLY in the first one does the problem as in the photo.
I tried to replace the fuser oil roller but I didn't solve the problem, nor...
I have a problem with a Konica Minolta C 224e it restarts continuously without giving error codes if I disconnect the hard disk it works but changing the hard disk gives the same problem.
I also...
it happened to me a few days ago that a c284 machine gave me continuously "An internal error has occurred.
System will reboot and error will be cleared" without error code
I noticed that the date...
good morning everyone
I read in the forum several problems about duplex and jam 3205.
I have the problem of this jam in two konicas I replaced the solenoid that activates the F/R strip, I put...
Good evening everyone I have a problem on the konica 253 and 220 series regarding the scanner on email because I can't send emails with ssl protocol on port 465, I also tried off and port 25 but it...
Does anyone have these firmwares?
OK thank you
could you send me these firmware?
konica.copyline@gmail.com
thanks
the sata-fw firmware I have this A7PU0Y0-F000-GXX-A6(00),
are there any new ones updated?
ok thank you very kind
it is more recent GCA-X4 or GC1-X4?
OK thank you very much
A7PU0Y0-F000-GCA-X4 is this firmware okay?
is it possible to have a list of firmware by date?
Good evening everyone.
I have a problem that I found in two konica minolta c308 and in a c258, sometimes it happens to me that the copiers restart themselves and give error code D050 and E301....
Hello everyone
I have a hp color laser jet pro mfp m281fd that does not turn on, only the start light turns on for a few seconds then if you go to press the ignition button it does not start.
has...
sorry you see badly in the image the problem is that in the second photo circled in red
the printing preferences are not clearly visible
how do i solve this problem of displaying printing preferences?
thanks54649
on the piece without spacer installed there are two supports that I believe are not adjustable because there are no screws instead
on the one with the spacer installed with the two screws there is...
good copyman
I had the doubt about that contact with the grease that I cleaned not knowing I thought it was just dirty
the problem of the different between color and black ok I know but my...
I have tried them all do you mean the difference between these two?
54158
I know they are different but with one or the other it makes the same problem
I have a problem quite strange in my opinion in the drums of the konica minolta c258 series
the drums print like this
54156
with a lot of testing I have found that the problem here is this...