ssphotocopiers@gmail.com
Type: Posts; User: IGEN93
ssphotocopiers@gmail.com
Hello , I have DC 252 which is not showing any consumables and it's serial number is mismatched , what would be a probable solution over this.
If anyone has encounter this problem , support is...
You don't need any service plan generator for 57xx model number , you just need to change the serial number and then insert the service plan .
you need to change the serial number , date and time and service plan to C with service plan code .
33881163
please communicate on ssphotocopiers@gmail.com
33192140 service code
service plan activation code 33189151
Reset the batteries one by one , moreover there are nvm values stored in the BP PWB which communicates between the ess and iot board , dont need to worry for the values .
i can provide you with the back up of sd card which you will have to clone with your sd card and then attach formatted hdd and install software for manual upgrade version 73xx.xxxxx.xxxx
I can provide you with the copy of firmware for sd card you need to clone it and insert in your machine and then insert formatted hard disk and install firmware for manual upgrade version...
please check the developer unit for black and raise the brush level of the black developer .
initially check for the voltage and leakage current , there might be earthing problem from the lan cable , try changing the lan cable and check for symptoms . also check the lan port on the machine...
Anybody working on phaser model please help , machine stuck on software update window no operation at all. there is no usb cable present inside the machine from main board . what to do and how to...
software available
DM ssphotocopiers@gmail.com
DM ssphotocopiers@gmail.com
DM ssphotocopiers@gmail.com
send me serial number
ssphotocopiers@gmail.com
it is clearly visible that yellow patch is defected and in very low density , adjust yellow developer brush level and your problem must get resolved .
for registration problem initially check for any error history , then increase the brush level of each developer assembly and then power on the machine . also try to check for any defects in the...
to solve registration problem of any production printer check the developer units, try to increase the brush level of each developer units and then run the machine this will solve your problem...
Try changing the flat battery on the nvm ram and iot board and then enter all the nvm values using the list in the machines tray . this will reset all your data in machines memory and enter the...
Hello everyone, recently got this error on the xerox c75.
Machine runs all simplex documents , but gives an error while printing on duplex. Error 077-123, after checking the code it says, reg....
your RIP is not a match to your current model, that is the issue,i can provide you with EX5000 Fiery if you need . that will be the best solution .
+91 98609 57551 whatsapp .