settings registration 2 and 8 settings registration ...as usual then
clear, engine, error clear
turn off and on
Type: Posts; User: mrfixit7
settings registration 2 and 8 settings registration ...as usual then
clear, engine, error clear
turn off and on
very possible you have a bad pcb board
you can MMI clear these machines or initialize printer settings, but i would start with going into service mode to update firmware. machine needs to be networked
touch settings registration...
so i replaced a hard drive on an ir6255 adv canon , and previously it had a scan shortcut and a fax shortcut . after replacing the hd i cant seem to find a way to set up the shortcut buttons.
...
https: //device.c-cdsknn. net/cds_soap /updaterif
no spaces of course. this sight didnt appreciate that i guess
URL IS AS FOLLOWS.
403 Forbidden
i did wipe and let it pull ip, subnet, and gateway again just to be sure .... no change still wont let me update firmware..
i also compared the delivery server URL with another machine and...
every time i go to service mode trying to update firmware the machine displays
[failed to connect to delivery server ,check delivery server and network.
as always any help is greatly...
installed new internal finisher, working properly again without fail.
waiting on a new finisher to arrive, will post update after install
ok, so i gained access to rui by defaulting printer under additional functions. i can now log in via RUI and into device manager under additional functions however im still not able to turn off...
so i tried turning this off.. now i cant log in at all RUI any clue how to reset the entire machine. ive MMI cleared it as well no effect on user management
so today i pulled the second sorter. it refused to pass copies jamming on the third piece of paper every time . timing was perfect. still displaying a jam code1101
i updated firmware today and...
1101 is the jam code
one of our clients has several jams in history from print jobs sent from computers. we have replaced the sorter already and cleared the sorter memory from the host machine..
has anyone seen...
so im logged in as administrator on the machine, go to user management to turn it off like i do with all the machines im refurbishing and programming before they go in the field.
but when i...
doing exactly as i usually would i can see where to turn of user authentication. the machine will not allow it. its unavailable / gosted out
the option under user management is unavailable, ive searched service mode and settings/registration.. i cant see how to allow turning user management off.
any help is always appreciated
we have a 5030 copier with a basic doc feeder printing well from file or memory and also from glass, but if you scan threw doc feeder the top edge is contorted a bit and still bold
we have...
issues fixed with replacing sorter, i tried a working board in this sorter, but it gave me the same issues ..jamming at exit etc.
i believe there is a short in the harness or a motor ..
a machine we have run for a year or more started to jam at finisher with no deformation to paper. looking into the jam log it displays an external finisher and sensor 103 stationary jam.
after...
we get 5 flashes on energy save button
thank you guys for your help
it wont let us print or enter download mode..
check the waste toner auger spin gear attached and make sure auger spins , toner can rock up and break auger end, also check pathway for waste toner from drum cleaning unit to waste toner bottle is...
in service mode there are display option switches.. one or 0 for on and off.. that was the fix for this issue..