I changed some bypass rollers once on a c305 and it was quite a headache. In the end I changed the entire bypass group because the problem was not solved. The procedure is as Luca says.
Type: Posts; User: emiliorsg
I changed some bypass rollers once on a c305 and it was quite a headache. In the end I changed the entire bypass group because the problem was not solved. The procedure is as Luca says.
No, the fuser of the new range is different from the previous MFCL9570CDW.
Hello folks, I wanted to ask you a question in case this problem is happening to you in your regions. I have already inspected four new Brother high-end color devices that present intermittent noise,...
Change the consumables for originals and perform calibration and color registration.
The problem is probably on the main PCB.
First check that the fuser gears are not broken, which is usual. Also check the status of the PTR unit. If you can try another fuser unit. With that counter it may be in bad condition.
Put the screen in recovery mode and update the entire firmware package with an SD
If I'm not mistaken, I think the duplex only supports A4 size.
Whenever a pcb is changed, the nvram from the previous board is installed, as many as it has. I don't recommend that you play with NVRAM because they are easy to break, especially if you are not used...
Well, I have the same problem with a client but with some Brother machines and I was not able to find how to load some paper settings as default so the client has to change it every time since they...
You need to put the nvram of the old pcb into the new one and set the serial no to sp5-811-004 and reboot
I have used the old c2500 in some c4501 and without problems. The difference, as Luca says, is between 5 and 15 grams.
Change the feed rollers and the separation rubber that usually comes off.
We generally do the same, it depends on the client if it is small or large. And when it is a new or formatted PC, as the machine is already configured, we do it remotely with anydesk or teamviewer.
From what I know of the market, the machines are very reliable and do not usually have strange problems. It is true that the spare parts are more expensive than the competition and in the latest...
I have rebuilt several with different results, always when the felt is good. Many times they have worked well, giving a result of about 100k, but other times they have given cold offset from the...
It seems that you have a bk PCU that is going hard and is causing a color registration failure. Try another PCU.
In octopus the last firmware update is 7-2021.
59935
Searching through the archive I found this bulletin It's in Spanish, I imagine you'll understand it. In case it helps you at all. I remember at the time, six years ago, I had that problem with an...
You have an old copier for such a modern Windows. Any other protocol that Windows uses, 2051 does not have it.
The 3-year warranty is only for individual customers, not companies, and is given by the seller. Ricoh, if I remember correctly, only gives a one-year warranty and on consumables such as the fuser,...
Maintenance counters are not cleared when backing up and neither is the toner level.
We use this method in machines that we recondition for rent. Remember to create a backup copy of sp5824 and every time you invert the nvram dump the copy of sp5825
Have you cleaned the leds?