Search:

Type: Posts; User: redzventures

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    28
    Views
    6,922

    Re: White Vertical Streaks on blue prints

    If it’s the dev unit you can try and clean the mag roller. To rule out the drum unit you can clean the drum charger/drum or swap colours to see if the lines move to another colour? Do that first....
  2. Re: What to use to clean Canon's white panel

    Are you talking about cleaning them in a bath during a refurb or general cleaning in situ? I don’t do refurbs as I’m a field tech and I use foam cleaner generally with WD40 for stubborn marks. I am...
  3. Re: RICOH DD 3344 service manual, and parts list.

    I found one here:

    Ricoh DD3344 service manual
  4. Replies
    2
    Views
    4,389

    Re: lexmark x854e wrinkle copies

    This was late in the day but did you try the paper which could be damp? Or paper guides in the cassette. Alignment issue along the paper path.
  5. Replies
    11
    Views
    5,701

    Re: lexmark c4150 please wait

    Seems as though removing all connectors on the controller board and re-seating would be an idea. You won't be able to flash firmware if the machine is not in a ready state unless it shows up on the...
  6. Replies
    9
    Views
    5,254

    Re: Reset NVRam Lexmark Mas 610

    Did you really clear the counters or just the supplies usage information?

    I know Lexmark would not be so simple as to leave such an easy loophole to reset all counters. Even other manufacturers...
  7. Replies
    6
    Views
    4,341

    [Misc] Re: Lexmark MX812 Copies slow.

    It will also depend on the paper type settings. Heavy Paper or other paper types will slow the machine down too in addition to the settings already mentioned.
  8. Replies
    3
    Views
    3,640

    Re: Lexmark MS811 going through fusers

    If you change the paper type to slow the machine down this could help but the fuser units may not respond well to compatible MICR just like any other compatible. Have they tried using Lexmark...
  9. Replies
    2
    Views
    3,690

    Re: Life of Lexmark

    I don't think Lexmark publish a life expectancy because it is a printer and not a photocopier with which a life cycle is normally provided. The life expectancy will be the point at which repair...
  10. Replies
    1
    Views
    5,201

    Re: Lexmark CD510

    Lexmark are pretty strict on doing things like this because all four imaging units are replaced at the same time and the counters reset automatically. The image unit assembly is considered a...
  11. Replies
    11
    Views
    5,670

    Re: Leading edge folded on M712

    It could be the sep clutch but since I’m not overly familiar with this model I can’t be too sure. The sep roller will be in the tray right? There are also a lot of fake HP roller kits out there worth...
  12. Replies
    8
    Views
    3,513

    Re: canon ir3225 black lines

    To be honest you’ve done well already as an end user but I would not recommend messing with developing units if you are. Removing and checking the fuser would be less intrusive for an end user but...
  13. Replies
    8
    Views
    3,513

    Re: canon ir3225 black lines

    The way you are holding the sheet of paper suggests the paper is feeding out of the machine short edge first (A4R or landscape). Is that right? The lines suggest it came out long edge (portrait). If...
  14. Re: canon ir2420 LOAD CORRECT PAPER A4 PLAIN COPY!!!!

    This might be a silly question but I don’t know where you are in the world. Are you copying a Letter or A4 document and what size of paper is in the trays? It sounds like it could be the registration...
  15. [Video] Re: Lexmark C540 Fuser Replacement ..... The engineers were on something

    Hi all,

    I think I have changed a fair few Lexmark fusers and the c540 looks like the same design as the cx510/cx517 clam shell design. If you’ve ever had to change the Fuser on the Oki MB451 then...
  16. Replies
    3
    Views
    2,652

    Re: Lexmark X746de color issues

    Not all remanufactured toner will cause that issue but they can and the magenta often tends to do this. Try a different brand to see if it makes a difference or swap fuser units just to rule out...
  17. Replies
    7
    Views
    3,190

    Re: Lexmark XC-2132

    Hold on, isn’t this the machine the opens from the right side in a clam shell design? With the imaging unit assembly containing all four drums and not individual drums that you replace? If so how did...
  18. Replies
    5
    Views
    4,212

    Re: Lexmark 410dn jamming from tray 1

    I’ve also done this once and yeah cutting wires sounds so wrong. I used the old wire to pull the new one through as well. I had the same problem as you as well. Rubbish design. Lexmark don’t seem to...
  19. Replies
    1
    Views
    1,365

    [Misc] Re: Lexmark MX522

    The ADF restraint pad just clips out with a small flat head. See instructions in the attached image.
  20. Re: Lexmark MX711de's with ADF misfeed issues

    Hi, not quite sure what exactly you mean. Does it feed at all or is it intermittent? Never had that exact problem but there should be a clutch of some sort to the Sep roller but if that fails it...
  21. Replies
    7
    Views
    1,825

    [Misc] Re: canon ir 7095 white line

    As the previous poster mentioned you should check the laser area and I would say clean the laser dust proof glass first, assuming the white line is in the print direction ———————- and not the scan...
  22. Replies
    5
    Views
    3,527

    Re: Need opinion on canon 6275

    500k is nothing for that machine. As an earlier poster said some maintenance items may be due for replacement. Check the maintenance count for those items just to cover yourself.
  23. [Electrical] Re: Canon iRC 2620 system manager ID & Password

    I think you can also use 7654321 for the ID and password if you had not changed it. It may still work and worth a try.
  24. Replies
    8
    Views
    12,508

    [Error Code] Re: KM5050 C3300

    All these comments were very helpful as I have to look at a KM5050 in the morning with this very code. Of course, I would have looked up the code and had a think but using sites like this in advance...
  25. Replies
    3
    Views
    629

    [Misc] Re: KM2560 - cassette

    Swap the lifter motors from another cassette and then actuate the white switch to the rear of the machine to see if the coupler turns. If it works then fine but if it does not solve the problem and...
Results 1 to 25 of 47
Page 1 of 2 1 2