Hi guys
Can anyone provide the pdf/a font data?
Kind regards
Type: Posts; User: jonbonse
Hi guys
Can anyone provide the pdf/a font data?
Kind regards
So an update on this one!
The reset tool worked a treat and had the printer working for 2 days so returned it to customer.
1 week later - frozen!
On the main board, there is a fan which I...
Hi, good to. know!.......It has 1 spring which seems to touch the inside of the rear cover?
I believe it may be sorted following a initialisation using the reset tool but going to make sure before...
Hi, thanks but I've never had the NVRAM reset tool....... Could do with it tho 😉
Yes it powers up fine with HDD set to not installed.... I can disable DNS settings but it happens when disconnected from the network too.
Thanks for the input.
Already initialised network.... This freezes without been connected to a network so there are no network handshakes....
My bad, it's on 6.05 as that's what comes with M1
Thanks mate but already on 6.03
So i fit exact same memory dimm but the printer did not show any lights etc so put the old dimm back in.
Also tried a new sata cable no different...
Weird as the hdd is recognised and lets me...
No but definitely worth a go!
Nothing happens 😕 still frozen...
Thanks but already tried 3 drives and redone firmware/function version to the latest which I believe is M1 function v7...
Update: Definately gets to 90% then back to 0% when doing the 'Detail Check' of the Memory....
Hi all
I went to a C224e recently that the display would freeze after power up. You would see the usual 'Preparing User Box' etc with the control panel amber LED flashing. Then it would just...
Good morning all!
Can anyone assist with a service manual for the OCE Plotwave 360?
TIKA
Hi all
Does anyone know what oil the Konica C250i fuser belt uses on the oil pad?
TIA
Thank you all!
I changed the speed and all good now!
Thank you!, worked a treat!
Thanks
Which A4 colour MFP. would you recommend?
Thanks!
I will give this a go tomorrow :)
No wireless im afraid :(
So I guess that means scrap the speed setting !
Thanks
No I already have it bud.
Thanks buddy, do you recall where the speed setting is? Admin mode?
Hi all
I am hopeful someone can assist with the below....already starting to regret getting the c3320i!!
I just installed a C3320i but it wont receive an IP address from the customers...