Search:

Hi,
Canon has released new firmware which will overcome this issue temporarily until the toners comes with chip again. So update to latest firmware and this will take care.
Cheers

Mark , Age is just numbers your experience counts. There is no retirement for knowledge. All the very best and be part of our family
Cheers

Update to latest firmware. New firmware will override this error. Contact Canon Authorized Partner or Canon Company for more information

Hi, just go thru the below link. Image defects are also caused by Microsoft update. They are coming out with patch to solve this.

Windows 10 printer glitches: Microsoft issues second out-of-band...

Hi, The pcl5e bringing blue screen is due to recent window update. Have a look at this link
Windows 10 update is causing havoc with some printers | TechRadar
Some of my customers using pcl 5e have...

Hi There!
we had faced such issues and lost two controllers. First confirm if the plugged HDD is working fine by connecting using external HDD case to your laptop. If it works fine, then the...

It is controller failure. There is an similar RTB on the same. Check the serial number of your Device if it falls in the list.

HI

Looks like magnetic Roller in lower development unit.

Hi,

I would also like to give it at try. Share the link to engr_mxl@hotmail.com

Adding to sandmanmac comments.

After clearing . Reformat the SD card and load the firmware again and continue updation.

There is a Scanner SP service mode ( Scanner SP 1-012-001) That is set to “1” as a default. This will clear the “recent” entries when scanning. Try this.

Sent from my LLD-AL10 using Tapatalk

Update nand flash firmware and your problem will be solved. Their is an RTB on that. Else it could be HDD

Sent from my LLD-AL10 using Tapatalk

What models are you using

Sent from my LLD-AL10 using Tapatalk

Use wifi direct in SOP.

Sent from my LLD-AL10 using Tapatalk

It was similar case but was for a fax module. In a machine which didn't have fax in it

Sent from my LLD-AL10 using Tapatalk

We got ride of this message by using a NVRAM of same model in mpc305 machine. Could be corrupt nvram si try with a new nvram before going for controllers.

Sent from my LLD-AL10 using Tapatalk

Novita serial can't be changed if you want to make mc work match bicu and controller with novita serial number. Else you need to replace nvram and eeprom need to follow correct procedure to get all...

You need to have NFC reader. Do you have one? NFC tag in cheetah is a used for storing device info using SDM. Not meant for authentication. If you have Bluetooth 4.0 in your mobile you can use that...

You can print using two method. 1 classic printer which needs a dedicated windows PC then you configure on Google cloud. 2. You need Java and GCP client solution which needs activation code, you...

Windows registry is corrupted. Just Google error code you will get solution. All the best

Sent from my Lenovo K33a42 using Tapatalk

Device Counter E-Mail Function
Overview
This is a function to report the device counter to the specified e-mail address periodically at the specified timing.
Setting Procedure
Check that the...

If you have latest machines GW 9A onwards and latest system controller firmware installed and SMTP is configured then you can get it automated using SP mode.

Sent from my Lenovo K33a42 using...

Hi in screen device setting you need to change the interface setting from machine network to WiFi if you want WiFi hot spot printing. Then configure WiFi direct setting join the hotspot and bingo you...

Hi,
Used to service these machines long time. If i may be correct this machine uses Transfer belt instead of transfer corotron. Check if you are gettin good image on Drum, then clean the Transfer...

Hi you need scan acceleration kit to be installed for scanning to FTP.