Keep in mind also, that direct pdf print from a USB device you need PS or direct print kit H1 (PDF and XPS)
Type: Posts; User: disamm
Keep in mind also, that direct pdf print from a USB device you need PS or direct print kit H1 (PDF and XPS)
Hi
if you have the sst version, you need the Service support Tool (sst), then first unzip this file, after this you can import this file into the sst.
Copy this file to a usb with the sst. reboot...
Yes is possible, why? :-)
Ciao, guarda qui --> Canon U.S.A., Inc. | Security
scorri verso il basso e troverai i tuoi documenti.
on this site, you will find a lot of security documents, you must scroll down.
i find this very good. had a quality problem, but with the latest update, everything tip top.
Yes, me
4364643645
i found this
436394364043641
v48.01 do not support smb v2/3, you need a special version and the 47.70 was this special version.
Hi i found this information:
1. Change Made When Upgrading ENGINE CONTROLLER Ver.01.06 to Ver.01.07 -> [E078-001] is rarely displayed depending on the operational environment. This failure is...
only a French language Pack dosn't exist. there is the official language pack, but without french: Bulgarian, Catalan, Croatian, Czech, Danish, Dutch, Estonian, Finnish, Greek, Hungarian, Norwegian,...
same here 11x17 and 12x18 only z-Fold. All Paper sizes more then Letter/A4 only z-Fold
Hi
what you want is not a z-fold but the Accordion z-fold
43510
from user manual generic plus driver
43511
[Finishing] Sheet
There is no Firmware on the CD.
Firmware is not avaible online, you need the SST and the Firmware.
we leave the drums in it until they don't print nice anymore. We do not pay attention to the % display.
check this webpage https://mediaguide.oce.com/ here you can find the paper catalogue that canon recommends.
how'd you try?
Via Settings or Service Mode? Try to update the device in service mode.
Hi denvertan
Strange combination of numbers.
With the MN-Cont 31 the dc con is the version 13 and not 8.
Try to install first the last official release, 56.08, and the retry to install this...
No, for the 42XX you have another password:
00006037
44648739
Manual Feed not compatible with Labels
43086
Hi
Strange then on my 525i ii i have labels --> but only in the Cassette 1 and 2. Seetings/Registration - Preferences - Paper Settings - Paper Settings - select the cassette and Set, Labels are...
which version is now on the device?
Tested here with my 5235i and it works.
if you make a communicationstest, you get an error or ok?
if you get an error, check the logs.
this id and password is for all 52XX with and without "i"