I'm not sure what you mean by compatible elements, If you are thinking of rebuilding the unit with parts other model number fusers, be aware that these days it seems few parts are common between...
Type: Posts; User: LaserSharp
I'm not sure what you mean by compatible elements, If you are thinking of rebuilding the unit with parts other model number fusers, be aware that these days it seems few parts are common between...
With the Quick Heat elements (ceramic heating elements, rather than lamps) many of the HP printers these days do not do any preheating cycle.
A 50 error, is a problem with the Fuser.... the .2 indicates that the fuser failed to warm up as expected.
A full fuser replacement is your best bet.
I might have this, I will go out to my warehouse
tonight and take a look, that is....if you still need it.
Client has a ar455 that they really like, problem is that the process unit keeps binding up and making a small gear to loose teeth, which pretty much requires the process unit be replaced.
I've...
Need an Exp tech, with knowledge of Xerox setup and configuration (work center and wide format).
This is for a subcontract job in Santa Clara, If this works out would like to begin offering more...
Never seen this caused by anything but a formatter on this printer. Other CLJ's I'd say pull the NIC card and see what happens. But I believe this is a USB only device.
Just replaced a full set of drums on the unit. Looked ok when i left but a few days later the customer called with a print quality issue. I went and checked it out and it appears as though the Yellow...
Normally you will not find that sort of adjustment in the service menu.
on most HP products the service menu is only going to have your counters for the maintenance kits, serial number, and clearing...
Be prepared to have to Replace, the formatter, the Dc controller and the firmware...
Do NOT replace all three at once...replace the formatter first and boot it a few times, let it stay on for at...
Thanks for the input Mary, however the website your link takes me too, has no mention of the cartridges being inquired about.
The Calibration Sheet should have been included with the system, if your client has lost or misplaced it, I would contact Hp (fun yeah) (BTW it's referred to in the documentation as a "Maintenance...
Supplies for the Kyocera FS-C5100DN
FS-C5100 Black Toner cartridge - TK-542K / 1T02HL0US0 - 5,000 Page Yield
FS-C5100 Cyan Toner cartridge - TK-542C / 1T02HLCUS0 - 4,000 Page Yield
FS-C5100...
That might be considered a trick question.
the Maintenance kit will replace both the fuser and the transfer roller on the models you asked about for them.
as for the fuser on the 2015, 2055 and...
Maybe I was a bit confused by what you meant by the top of the page... If you mean the leading edge of the paper, which in most circumstances would be the left edge of a portrait layout...but now...
I have a Droid...(motorola) and It DOES support multi touch.
for whatever reason the default web browser does not use it, it uses a double tap for zoom, but one of the first free apps I downloaded...
When you print a config sheet does the printer show the tray as being configured for a4? and not maybe..Letter?
So it's time for a ADF rebuild kit for this unit, Part is allready on order. and it's pretty clear how to change it.. I'm not sure however if the kit will come with instructions on reseting the ADF...
Thanks for the input guys, any idea on where i can get one? or a part number?
the one place I go for xerox parts is telling me this unit is not sold as a spare..and wants to either sell me just a...
Lol about the 4500 being a pinto...they ARE old.. but all in all, when maintained properly a good machine. SLOW by todays standards yes...but there is more metal in these units that in most of todays...
If they have a 5500 series color unit 5500/5550 LJ...then the transfer belt life can be reset through the configuration level of the menu...reset supplies..replace transfer belt.
Caution here....
Only the 4500 of the two models you have listed above runs a transfer kit.
it's an odd unit as it has a gear driven use meter built into the belt unit, I believe you can reset the transfer count via...
This is a Lanier branded unit, I did not have time to look at it very hard, but the customer says it was working until they pulled the drums to clean...(do to print quality I guess they thought it...
Xerox 420dc Jams everytime at the diverter assembly after the fuser unit, I pulled the fuser unit and checked for broken gears etc, and it appears fine, in fact after putting it back in I got "1"...
Well I will not dismiss the above post in anyway, although I have run across more than a couple clients with an attachment to these machines based on the amount of amount of money spent on them.
...