Search:

What is the point of answering to a 7 year old thread that is even marked as solved?

Yeah something is messed up with Windows yes, noticed that behavior on 3 different site installations now. It seems worse on Windows 10 though.

The installation i did yesterday took far too long...

Hi, anyone know if the fuser unit of a MP C4502 works in a MP C3002? Or if there is a way to modify it to work on it?

Different part number at least, not sure if there is a way to modify it to fit.

2003= D1764014
3003= D1464062

That's 220V EU-fusers that is.

Noticed that the whole fuser assembly was near...

Like Slimslob said, but could start with the obvious that i bet is far too easy to miss if new to these machines, if it is the same as Pro C5200 you have to open the lower left door where the waste...

We tried replacing the drum and same issue, the fun part when we tried printing out the same type of test page with the gradient colors from service mode it worked, reinstalled the firmware and it...

We have a customer with a very odd behavior on the machine, they started to claim that some users that when they print the entire sheet turns magenta but for some users it seemed to work, we managed...

Probably a client with Windows 11 and the printer is installed with a WSD-port and the Microsoft IPP Class Driver that is the cause. Install the printer with the correct driver and with an IP-port...

Easiest and best way to scan to Sharepoint-sites is to use the Microsoft 365-package of RSI (Ricoh Smart Integration)

That sounds like an issue we are having with a similar machine, but it doesn't seem to lockup though.

The problem that machine is that the fan is running constantly, it seem to happen after a...

Exactly, always did the same, don't even think the PM-table in the service manual recommend you switch parts.

from the 306-manual:

Item 36K 60K 90K 120K EM Remarks
PCDU - M (R)
PCDU - Y (R)...

Hasn't the fusing unit always been cheaper on those A4-models? (MP C305-307 IM C300)

I sent my colleague to check it yesterday and apparently the second paper holder wasn't set in place correctly which seem to have been a cause for the j54-code.

Hi!

We don't have that much experience of the MP CW2201SP and we have a customer that has this unit and have alot of problems with it and most seem to be connected when printing from the second...

My co-worker ran into a similar problem, it started that the magenta dev clogged up and destroyed the magenta hopper as well so he had to disassemble it quite heavily, after everything was switched...

I doubt that, they're called PB1050 on 305 and PB1080 on 306-307, the IM C300 also has a new deck that isn't compatible with the 307.

Hi,

I wonder if anyone else have ran into this problem?

So far i have gotten 3 machines in a 6 months-span with a suspected 4th called today and all of them have been the magenta developer that...

I have ran into that problem as well on both a 305 and 306 and it turned out to be the paper that was the cause, but there is a workaround as well that at least works on those two machines and that...

When you say there are no icons? Is it a 3003ZSP with the android panel? If so it might be a real weird bug that there is a paper lodged behind the cassettes that is causing the controller board to...

Could be a label that has gotten stuck on the ITB and/or jammed in the cleaning unit.

Could be a PM-component that has passed over time, think i've seen it myself on some older machine and then it was the ITB or ITB Cleaning unit that was on 150%.

It's not equipped with a FAX unit.

I have the machine next to me and it started rebooting again, what i noticed is that when it started the reboots were frequent with about a seconds delay to get...

Hi, we have a customer that has a problem with this machine, the problem started with that it could spontaneously start rebooting permanently so it felt like it could be a power issue problem.

We...

Could it be this?

135.D2962860
BRACKET:PAPER
END SENSOR

125.D2052526
PAPER DETECTOR

Hi, besides updating the firmware that was exactly the setting i have already changed and it seemed to work at the office but apparently i didn't test it long enough to see that it was still a...