Search:

check fixing drive gears

check secondary transfer unit

jam code ?

try to adjust corona height!!!

check fuser upper roller and drive gears , part no: FS7-0007-000,FS7-0006-000

did you try itb ?

JAM CODE?

open OR short circuit of FUSNTC6 from power up , check fusntc6.

Registration out?

try to clean the patch sensors and do a auto color mismatch adjustment.

check,


FC8-4540-000Protect Shutter

FM3-8902-000 (FM3-8902-010) Pattern Read Shutter Drive Assembly

really? who cares you are a service manager or not!!!!!!!!!!! till now you cannot provide helpful informations or solutions in any of the threads in this forum (especially in canon copiers threads)...

👏👍

ha ha

exactly I know what I’m ! But you people only knows blaming others and named field supervisor..

mr Philip agreed , but if the customer requires scan to folder and machine doesn’t support smb2/3 (if the smb2/3 supporting firmware also not available like ir adv c5051 models) . What you will do ? ...

turn on the smb 1 and make sure network discovery and file sharing its on


special firmware is available on this model for supporting smb2/3 and its not get from internet

make sure fixing unit is good one ,check registration flag is actuating properly and there is any obstacles in paper transport path especially near the pre transfer roller

you can also check with...

[QUOTE=magictoner;789888]Canon IRA C5235, it got paper jam in the Fuser Unit only when it printed Cyan or Full Color, making "Ge, ge, ge...." noise, no matter what sizes of paper. But when it...

check developer unit and laser

did you check the outlet voltages? ground to neutral ?

replace the yellow drum and check (better to replace all the color drums because cyan and magenta drums also seems life is near to end)

did you check the yellow drum?

please post a complaint copy

hi try with ufrii v.30 driver dont use generic plus

imageRUNNER ADVANCE 8105 PRO - Support - Download drivers, software and manuals - Canon UK

replace upper fuser roller with OEM roller and check.

what about the heat roller ? is it OEM ? make sure its genuine heat roller or not .