roll one it is.
Type: Posts; User: spyro
roll one it is.
There is only skew adjustment in the dadf, no feeding one. U mean stronger spring? Since it seems 2 sheets r feeded sometimes cos the retard dont push strong enough. Ive kinda ignored the spring till...
Hello, i have a problem since some time with few machines B8065/75 with multifeeds. This happens with new spdh feed rolls so i guess either xerox produce defective retards or some of feeding...
Guys have u experienced any issues with altalink B8045 side 2 scan assy degrading in time making semi grey or semi blank non even images. And if u got such, except the electonics failure is it...
Its generally 3,11,13
Obviously u got problem after the fuser connector pj100. So check pj100 to pj35 and to pj24, either the power or the temp - lvps or the iot are problematic if the cables r fine.
no much point in changing all that expensive parts. It looks like an option enabled suppression or paper issue or try reload other firmware. U can always persuade them no one uses fax these days...
So u got that message and the machine still runs ? or its just blank copies/prints and u think its ros ? Do u have error 06-530-00 ROS system failure, if so did u finish 361-340-00 RAP. Check 761-002...
Its IOT Controller communication failure. Check the state of the Led on the sbc, maybe problem with connections, hard/sd/ sbc. Try maybe an altboot.
Alot people often had problem setting up network scanning smb/ftp or other so it will be helpfull for many.