Hi Guys, I got it to work, I Found a (Bad carriage board).
Thank you,
Copycat
Type: Posts; User: Copycat
Hi Guys, I got it to work, I Found a (Bad carriage board).
Thank you,
Copycat
We actually changed the drive belt and a brand new carriage assembly. The machine booted normally to the ready for paper stage and machine does not accepts paper when loaded. without any computer...
Thank's Guys I figured out the problem ( Faulty DC power supply).
Copycat
Hi, Check the drive unit motor, Or replace the complete drive unit , I had that happen to me once.
Thank you,
Copycat
Good morning,
I have been working on a SHARP MX3050v and for some reason it reboots itself at any given moment for no reason. The device appears to work just fine, I can print and copy and even...
Please read the thread all is there.
Thank you guys, I got it Simulation 50-27 Scanner and Fax adjustment. I copied the sethings of the fax to adjust the scaner. and it is working graet.
Hi , I used simulation 50-27 and adjusted scanner using the same settings from FAX settigngs.
Thank you,
Hello,
This is a new device with about 8000 prints in it. When we copy and print either single sided or double sided they come out perfect. However, when we scan, regardless of whether we scan...
Hi, Does anyone know what causes (& fixes) of a 1mm line on the front and back at one side of image scan on these Sharp MX-6070N with only 8,000 c/p. Copies and prints come out fine.
Your help...
No, this is a new clean setup.
Thank you,
AM
Hi,
I forgot to mention this machine is in our shop and no DHCP allocation is in place, Network card has been resented 67-17.
Your help is greatly appreciated,
Thank you,
AM
Hi, I have been working on a Sharp MX-5070N, I have been trying to disable the DHCP to manually enter a new static IP without any luck. After I submit and reboot the machine it goes back to DHCP...
Hi, I have been working on a Sharp MX-5070N, I have been trying to disable the DHCP to manually enter a new static IP without any luck. After I submit and reboot the machine it goes back to DHCP...
Hi, You may want to tray PrecisionRoller.com: Online Shopping for Toner Cartridges & more
Hi, question, Are any of these machines Mac's, if they are MX-M266N copier requires mX-PK11 Postscript® 3™ Kit license, Are these computers Window 32 or 64 bits.
Sound to me like a...