Wow! Great information. Thanks everyone. This site has become invaluable. I think it's time to contribute. Thanks again.
Type: Posts; User: Copy of a Copy
Wow! Great information. Thanks everyone. This site has become invaluable. I think it's time to contribute. Thanks again.
I have worked on larger Toshiba mfps like a 7516ac. Are working on production copiers that stretch like 20 feet plus in length all that different to work on? I would imagine there would just be...
BTW, this isn't something I'd do on a new install simply as I have not tested it. However, if you need to limp a mfp along for a few years this seems to work on the 20 mfp's I've tested it in.
You are correct. On a console higher speed mfp such as a 7516ac, 7506ac Toshiba, color does come premixed in toner, however sometimes the LED discharge gets blocked, and it pulls so much dev that you...
I added developer, not toner from previous series of mfp's. My mistake. Also, I credit the customer for toner consumed or bring with semi full toners and consume ours instead of the customers.
I have seen this issue across a few series of mfp's, mostly 4515ac's, 5005ac's. The mfp is set so the customer cannot change the paper size. I set tray 1 to plain LT then somehow it gets switched...
I have put k developer in the color units. Toshiba will say you can't. The color will obviously be off at first but if you just run 100 full color copy's and consume the k toner that comes premixed...
Within service mode, by setting 08-3820 to 1 it activates ECC cloud connect for automatic reporting to our servers for meters and other statistics, it greatly increases the amount of time the mfp...
All great answers, thanks for the input!
Does anyone have a suggestion for a multimeter lead connector type for testing male pins on a logic or system board? I have the typical leads and smaller leads but was wondering if there is a lead...
Anyone have a decent set of spray bottles for cleaners such as Windex? I use them on every call and the nozzle goes bad and the plastic warps fairly quickly. looking for better quality.
I have a customer whom is trying to feed #10 envelopes from the bypass tray of a Samsung 4080fx and they are getting creases/wrinkles on almost everyone. They dont know who makes the envelopes or...
My understanding of the SRAM is that its Static, a semiconductor, and Volatile ram or in other words a temporary storage device that if indeed is volatile gets wiped when the printer is turned off. ...
When pulling out a tray cassette on a 4518a the tray gets stuck in the tracks it rides on. You can pull it very slow and carefully slightly but is annoying. I also noticed you have to pull it on...