Search:

Hello,
Canon c7270i printer has bypass problem.
Each time we turn on the printer, the paper size selection screen appears, but there is no paper in the bypass.
I changed the sensor with the flag,...

Hello there ,


I am getting update error on cds for canon imagepress c710.
I cleaned the ca-key but no results.
I request your valuable help.

50963
50962

you are absolutely right.
I will change the password. I struggled for 3 days because they didn't tell me what they were doing to the machine.

Hello there,


The customer changed the settings of the mirrors of the laser unit and changed the angle of the mirrors in front of the range.
I fixed the problem by setting it up again.
Thanks...

Thank you for your help.
problem solved.

Hello there,


I write what has been done;


I adjusted the motors of the laser units to be 2.3 cm,
at-img-x and auto img 3 aligned the color in place.
but the yellow color stays 2mm right...

Hello there,


You're right, the machine is causing me a lot of trouble, but they say it needs to be done, so I can't do anything.
I worked from morning till night today. I've done 3 colors...

Hello there,


I have color alignment problem on imagepress c6010 printer.
auto-img and at-img-x throw errors. Black color does not replace.
When he changes the laser units, the error changes to...

Hello again


fog problem, I stopped the machine before the paper entered the first fuser unit. there was no fog. fogging problem occurs after entering and exiting the first fuser unit. I replaced...

Hello there,


Canon poddeck lite -A1 parts manual I searched all over the internet but it is not there. can you help please :(

thank you.
i will check the units

Hello there ,


I started getting error E065-0302-05 on my canon c6010 machine.
The drum is in good condition. but after 50-100 prints this problem appears. There is no problem when I put the old...

Hello there ,


Problem solved. ,
The problem went back to normal with the replacement of the black patch sensor.
Thanks for your help.

sure i tried :)
I need to replace the patch sensor like you said.

Hello again


I did the PT-LPADJ process. window value 1000
I removed the patch sensor and cleaned it.
I cleaned all the toner pipes + subhopper to see if it was clogged.
but the result did not...

I performed the PT-LPADJ process.
but after 100 prints the error came back.
dens value decreased to 6% for black.
I couldn't find a solution :(

of course cleaned the patch sensor many times.

Hello again,


Starter is new. I have made all the necessary adjustments.
but the machine seems to be unable to transfer the required amount of toner to the developer unit.
waiting for your...

Hello there,


I have Canon c6010 abnormal dens problem.
In ground works, the dens value decreases to -5%, the machine gives error e020-0481-05. In normal jobs, the dens value is around -2.50%....

Friend,

Values as in the picture:)


4997849979

Started the developer by inset.


I will of course check the values,


Copier->Display->Dens->Dens-K
Copier->adjust->Dens->HLMT-PTK
Copier->adjust->dens->P-tg-k

Hello my friend,


I did everything you said and tried the cards from a different machine.
I checked the cables. The problem remained the same.
this machine was working properly.
After giving...

thank you,


i will try them all. I will share the result.:)

I changed the Corona units again.
I cleaned the laser units again.
I changed the grids again.
I cleaned the toner sub-chambers by vacuuming.
I tried with different developer unit.
I checked all...

Hello again,


I try everyhing. but the problem persists.
still does the gray fog issue.
Could it be related to calibration?
How should the calibration sequence be?
1-)Shading Correction...