I have exchanged the door with another machine and the problem is solved and both machines work. I am not very convinced by the solution we will see what happens over time.
Type: Posts; User: crisinjomi
I have exchanged the door with another machine and the problem is solved and both machines work. I am not very convinced by the solution we will see what happens over time.
Hello colleagues, I have a 5053ci that I get the error C2300. I have changed fuser, fuser motor, motor feed plate enginer, I have also updated firmware but I can not solve the problem. Any suggestion
We have one and the quality of the images is quite bad.
The customer constantly complains about that quality.
I do not know if you can help me to obtain a better quality when printing images.
Good, some companion has configured in the Pro C7200 magnetic paper.
Well, I have a client that wants to print in that kind of format. And I don't get the correct configuration since it always...
Well the solution has been to return all SPs that were modified to their default value and in user tools disable use of print volume and user authentication.
Thanks for your help.
The problem is that a Ricoh application called NDD was installed, and after uninstalling it, SC637 causes me to run into problems.
Everything has happened since the application was uninstalled
Good afternoon mates.
I am reading the MPC307 manual and I can't find how I can reset the machine to factory, to erase some applications that have been installed.
Thank you.
Good companions, I need your knowledge.
I have a Versant 180 to which I have changed four times the 2 BTR because it stains the prints behind me throughout.
It always happens with 300gr paper and...
ok, for the moment everything is going well apart from continuous jams in J114.
Ok, I will replace the microswitch and tell you the result.
Thank you
Good afternoon, I have been reading on the forum the problem of SC720-39.
My machine jumps once a week and that is when they make many stapled prints.
I have greased and cleaned SR-5050 and the...
The solution was to remove the btr counterweight. Anyway when I finish the work I put it back on.
Good afternoon.
I would like to know if you can configure the xerox versant 80 to print on PVC. or how to configure it.
I have created a profile for the PVC I do not pass Fusor is between the...
I've been reading this page for a long time, which I think is fantastic because of the great help you give. Although my English is not very good I hope that with the translator you understand me.
...