Well he was not my colleague... he was from another company, so I wouldnīt be suprised if he didnīt tell me all the story :)
Anyway thanks for help...
Type: Posts; User: rapo_tech
Well he was not my colleague... he was from another company, so I wouldnīt be suprised if he didnīt tell me all the story :)
Anyway thanks for help...
I just couldnīt understand how would toner hopper produce this kind of problem...
Print was fine on drum and belt, but it would not transfer to paper.
Tried calibrations (dev refresh,...
Is there any chance you looked print on drum and belt (emergency stop)? Was it good?
Because i have good print on belt but does not transfer to paper...
I assume if theres problem with devs...
Sooo had some fun yesterday and replaced transfer HVT board. Did not help...
Also measured contiunity from here 58277
to here 58278
Were those the right contacts?
What/where did you vacuum on developers?
And did you have all the colors faint or just specific ones?
yeeshh.. I had to put some Kyocera rubbers on KM machine because i didnīt have KM originals with me.
Lasted 60 000 pages... vs KM orange ones lasts usually 130 000 -150 000 pages :)
Checked all the springs on conveying unit on the first visit (y)
Will check belt springs and measure continuity...
No moisture. Printer is located in school, where is good climate. U089 is same.. All colors are equally faint.
But to be sure, I will take some good quality paper with me next visit.
Iīll...
Hello
Using OEM toners.
Problem is faint, almost like watermark prints.
All the colors are equally faint. Checked visually drums, devs and belt.. all okey.
Did emergency stop on skyshot....
5 year old firefox also resolves this problem :) Download Old Versions of Mozilla Firefox for Windows - OldVersion.com
Cleaning the charge roller metal sides cured the problem :)
Thank you
What happens when this machine needs to go in warranty? :D
Does Kyocera look at log and says user has used compatible toner and warranty is void? :confused:
In my case did not last at all...
After fuser cooled down then first page came out smudged. I donīt know, maybe i donīt have good grease.
I disassembled the fuser once again and added new grease...
You will remove only oil pad and use HP grease.
Kyocera P2235dn, M2040dn fuser repair. - YouTube
Thanks, i will pull out the drums and check charge rollers...
Hello
Client called about lines on printout.
On site i was suprised not seeing usual calibration mark/lines...
Problem is various horizontal lines and not actually repeating at same place....
55680
RTFM!!
Replaced laser unit and it is alive again...
hello..
When start printing, everything is normal except it does not rotate pick rollers... and shows error 4000:0181053
Paper lift is ok, just does not rotate pick rollers.. so i thought maybe...
You have to give more info... What was the problem that you updated firmware?
I have had problems with bad thumbdrive. Try another thumbdrive...
Cause: non-OEM toner :rolleyes:
Disable Ecoprint :cool:
Easiest solution is to use older Firefox: PortableApps.com - Browse /Mozilla Firefox, Portable Ed. at SourceForge.net
Get 3-4 years old firefox and you can access web interf.
No u cant :) Even if you replace the electronics, how u supposed to replace all the toner?
Tried the same way...
I had problem when printing in morning, first print was still smeared.
Dissassembled again, cleaned and used grease with few drops of silicon oil.
So far (5000-6000pages)...
Maybe the dark image printing could be solved with the following adjustment?
54623