Konica Minolta says it is necessary to install Local Interface Kit EK-608 before installing IC Card Authentication Device AU-201S.
What if i do not install EK-608 OR do not purchase it and...
Type: Posts; User: beowulf
Konica Minolta says it is necessary to install Local Interface Kit EK-608 before installing IC Card Authentication Device AU-201S.
What if i do not install EK-608 OR do not purchase it and...
I will try this for sure.
I have replaced all the rollers. (Pickup, Feed, Separation) but problem is still there. I have removed cassette 2 feed unit and checked everything. Sensors and cleaned the shaft though it was fine. I...
22
Hi,
I know this is not the correct forum to ask for manuals.
BUT its not the service manual i am looking for. Its the installation manual of local interface kit EK-608 for bizhub 287/367.
I...
bizhub 754e, paper jams during copy from 2nd tray in front of vertical transport sensor (PS12). Before jam it gives noise of friction or rigid feed then it jams. Jamming is frequent. some times does...
Hi Experts!
I am having a problem with RADF of bizhub c221. Its machine like 454 but with small panel. Document feeder model is DF-627. When i scan or copy documents from DF strange and loud noise...
Thank you very much for reply. Firmware is not loading. I will check the rest.
I have removed all the attachments, DF, and finisher. just unplugged the cables of DF and finisher. Cabinet was removed already. But nothing happened. Same problem. can you please guide more or share...
When machine turn ON, 2 bars show then gradually 3rd, 4th and then the last bar shows after that no space or bar is left. Machine gives beep during this. Start button Red. After this it stays in this...
Hello Everyone!
I know very well that this forum is about Konica Minolta but the machine i am going to talk about is also manufactured by Konica Minolta but with a different brand name so thats...
I usually calibrate on Coated ML. with 10 sheets under it. Engine calibration is checked in tick box in color centro.
You are saying before calibration and if the parts are less than 80% worn i should do all adjustments first then perform calibration? it will improve accuracy output? I thought i am not doing it...
No fiery attached.
Hello Guys!
Every time i do color calibration of KM color presses like c2070, c1100, using X-rite colorimeter ES pro 1000/2000 through color centro i do not get results nearest to the target....
Dear All,
I am a little confused about cleaning of Rubber rollers (Paper Feed Roller, Pickup Roller, Separation Roller) of all Konica Minolta machines from desktop to console , from MFP to color...
Thanks for your reply.
I never tried setting up FTP server option. Can you please guide how to do that?
Thank you very much for your generous reply.
I have checked NTLM V1 and NTLM V2 both but error remains same. How can i unlock SMB 1.0 and 2.0 Protocols in windows 10?
Hello Experts!
I was wondering if you guys can give me a piece of advice or any useful tip to solve my issue with Konica Minolta bizhub 367 scan-to-SMB.
Error Details: Login Error
Network Error...
Thank you copyman. The link you provided is down. When i click this shows up :403 - Forbidden: Access is denied.You do not have permission to view this directory or page using the credentials that...
After research on the internet i found that for FTP there should be an FTP application running on PC and i have shared a folder but its not working.
Hello everyone!
I just purchased an old and quite cheap refurbished photocopier from a local shop for personal use. Everything is just fine only the scan to smb is not working. I cannot see SMB...