Cables should be all correctly fitted but it's a good shout to double check them anyway to be sure as I did have the cables off :)
Type: Posts; User: kendod27
Cables should be all correctly fitted but it's a good shout to double check them anyway to be sure as I did have the cables off :)
That's good enough for me, will give it a try as your thread is the only 1 I can find with same issues and code. :) Thanks
Sorry it's an old post but you didn't state how you fixed it?
Did you replace memory, reseat memory or something else?
Thank you for the information. Yes, I wasn't sure if it could still be the interface or not as removing it would still cause a fault of sorts.
I'll now look into sourcing the parts, if possible.
...
Thanks for the information.
Cleared the bios on fiery - still 25
Removed the interface board from fiery - still 25
So this means the fiery mother board is bad?
Does it have to be an exact...
Hey everyone, looking for a bit of guidance on my trusted old Xerox DC252. The bustled fiery has stopped working. It's the X3eTY part number 45057733 connected to rear of machine.
The symptoms are...
This appears to have resolved the issue. Touch wood! Was it really that simple?
The old girl is back in action! Thank you so much for taking the time to help out.
Brilliant, thank you for all the information.
I have booted up the machine without fiery connected as advised, no errors.
So must be related to the fiery or communication between them.
Will...
Hi Guys,
I have a Xerox DocuColor 252 that has suddenly developed a terminal fault.
Few days ago, came in to find red error on screen stating error 127-337 please restart. On restart it...