Problem
My client had an issue with A3 jamming on double siding.
The paper continuously jammed when being output on the tray before being turning over to go in the door for the second pass....
Type: Posts; User: Leeyon17
Problem
My client had an issue with A3 jamming on double siding.
The paper continuously jammed when being output on the tray before being turning over to go in the door for the second pass....
Hi All,
I had two HP OJ Pro 8720 with the same issue. Both of them were in service for about 3-4 weeks each
Error displayed below;
Problem
The HP printer kept displaying the error;
" The...
I have checked all three sensors mentioned in the jam history as well as the others in the paper path. the flags all move freely and actual sensors are snuggly fit to the location. I also cleaned...
I did open and close all covers, phantom paper jam still present.
Hi All,
I have an issue with phantom paper jam. The user removed the paper.
and the copier displayed paper jams at various locations; just before the drum, the fuser and the before the inner two...
Thanks everyone.
I will check all these suggestions tomorrow and will let you know the progress.
The link with pictures are also very helpful.
thanks again.
Hi All,
The copier continues to display the E0027 error. i have swapped out the development unit it suggest had the fault E0027-400, but then just swaps to another E0027 error. E0027-100.
Then...
I have taken the reg assy out. The sensors are fine. disassembled.
It seems someone stuck something pointy in there to remove paper and the metal had a small edge on it.
the paper was grabbing on...
Thanks Phil B for the suggestions.
I have cleaned the row of sensors in the registration assembly. used compress air and then a damp cotton bud,
I also ran the sensor test. it came back OK.
...
Hi All,
I am currently experiencing issues with the Registration Feed Assembly.
Every few prints(Random, not specific) the paper will jam in the registration feed assembly.
The paper will feed...
ok cheers for the help and advice.
I also read up about the SMB V1 and why not to use it. Also checked against the microsoft links. It was very helpful.
Thanks Phil.
Hi everyone,
Im new to this forum.
Ive been an assistant to a tech for the past few years, and have now moved up to try and make headway in the electronic industry via a Copier career.
My job...
Hostile.. linked it with your profile pic as a joke. will use an emoji next time :D
yes I know I have no idea, that's why i said I have no knowledge of server software.
Im here to learn and...
A bit hostile. but OK. This is why im asking.
Can the firmware upgrade only be downloaded by service techs? if so this is an issue as Im on an isolated island.
is there a way of connecting with...
Hi all,
Im new to this site.
I currently have an issue with the canon iR2545i copiers. We upgraded our storage servers to windows server 2016.
According to the manual, this series of copier...