Only issue we have (but not sure if its an LCC issue MX-LC12) is that the rollers gets a groove/flat spot. But I've only seen it at an account where they do at least 10-20k weekly. Machine was...
Type: Posts; User: nanohitmen
Only issue we have (but not sure if its an LCC issue MX-LC12) is that the rollers gets a groove/flat spot. But I've only seen it at an account where they do at least 10-20k weekly. Machine was...
We stopped using AR620 RT and use MX-850RT / And MX-850DF (document feeder) for the feed kits, little more expensive but they last longer and we go back left often to replace rollers.
thanks that did it
to double check you do mean the sharp MX-M465n watermark right? If so here you go
Google Drive: Sign-in
when the website is back up ill grab it for ya.
On a related note https://www.sharp-idncservice.com/ has been down for a while, any one have any idea what's going on?
oh damn, gonna start checking on that,thanks for the tip.
If you've ever worked on the Ricoh MP series I swear these BP's are just Ricoh's with Sharp Covers. The ADF rollers are now a pain to replace vs the MX-5071's, The fuser is a hassle compare to the...
We were told by Tom Jones just to replaced the whole fuser and not bother doing the rebuild on these. What did your rep tell you guys?
Got my current and previous job from indeed. 18 people applied to the job at current place.
that tool is ass, try this one Ic/cpu Rom Smd Chip Plcc Protection Pliers Bios Circuit Board Extractor Removal Machine Repair Clip Picker Hand Tool - Buy Plcc Protection Pliers,Bios Circuit Board...
make sure they are using the right drivers. I've seen issues when people use universal print drivers or wrong brand drivers.
Hello was just wondering if any of you have used card authenticators for the Sharp BP series using sharp OSA. Have a client that wants to use them but would like some insight if any of you have had...
had the same issue but it turned out to be a bad toner cartridge
I had a couple of BP finishers that came with the cables not properly inserted from the factory. they were coding out a lot.
shameless bump, getting drowned out
I swear this thread cursed me, just got back from a H5-01 call on a MX-M6071, guess what I need? A new fuser. 102k on this one.
On our BP70M65's they are averaging 20-50k monthly. And tell your...
Just go with the BP series for Black and White, where do I begin on these god awful machines.
The fusers are crap, I have 5 Fusing harnesses on hand, The upper thermistors keep going out have 5 on...
Use to hit up ebay for work shirts but haven't found any. Looking for size M or L Sharp,Lexmark and Ricoh polo's. Bonus if it's the sharp platinum service provider. Prefer them in black or grey....
I began plasti dipping boards to avoid the whole paperclip fiasco. Was happening way too often
is there toner on the 2nd transfer roller?
get a flashlight and shine on the slit glass,100% sure there is a ink dot somewhere.
I had that error with a new BP machine, turned out the connection wasn't all the way in on the lil board in the rear of the finisher
I've seen a lot of issues Not making it to life, having to change fusing harness because of random HX's Codes. I'm guessing sharp went cheap on them because they are crap for the most part. Changed 3...
Talked to my coworker about this, have you check the DV unit? Also said might be bad Developer.
Indeed is what I use to shop for new jobs, landed two tech jobs that way