Thanks buddy.
Will continue to use the special firmware. TQ TQ
Type: Posts; User: denvertan
Thanks buddy.
Will continue to use the special firmware. TQ TQ
The latest update on windows 10 release 21H2.
I am no longer able to enable SMBv1.
Copier constantly show #751.
May I ask does the latest Canon C5200 series firmware supporting SMBv2 or SMBv3...
The error code is E000012-1000.
This copier is kind of weird. Any ITB belt install will not pass the maintenance mode ITB check test.
I have even installed new ITB belt + rack. But when run the ITB check it will take so long then...
I have a C5255i that will always print out a blank cover page.
Is there anyway I can turn it off ?
It only happen during print.
Copy does not have this issue.
We have this Canon C5235i with Single Scan feeder.
It will not pull all paper in the feeder. (Likely to stuck after 3 to 4 pages)
We have change ALL the roller and also the pad inside the feeder....
Thank you for reminding me.
I did the Gradation Adjustment 3 times using A3 paper with few blank paper behind it to make sure it read correctly.
Issue: (Printing Grey Background, printout showing light magenta)
The whole paper suppose to be in light grey but printout showing slight red it those grey colour area.
Try to print with design...
We found that during the machine is receiving the file, there will be error "Connection Time Out" which causing the machine keep repeating receiving the file process again and again.
What we do is...
These C754e is very different from the normal Konica Machine I see before.
It have value at PRINTER "FEET" at CE Mode Imaging Processing Adjustment.
I have try to run Stabilizer + Initialize Data...
Firmware is A5C10Y0-F000-G20-M1
Driver version is BHC554e PCL6 Winx64 5.4.0.0 EN
I wish I can disable the secure print. Yet customer insisted secure print is a must.
And today this message...
This second hand recon BizHub C364e have latest firmware update.
And "Secure Print Only" enabled.
Recently, it will have all jobs hangging inside the machine with "Saving" and I need to restart...
My old school method is to turn the roller manually and make sure the whole roller is stick with developer.
Any scientific way I can check the roller instead of my old school way.
This is what...
Do both ?
I did both Printer and Copy already.
Attempted many times but it still no value. A few times I started with Stabilization + Data Initialization. Still the same.
I am new to this.
Does the FEET is normal to have no value ?
44457
I read the service manual it just mentioned to redo the Gradation Reading after restart the machine.
But after many...
This is the panel during the startup
https://youtu.be/13CSetLwrmc
Test to unplug one connector on the DC Con and try to turn it. after 16 times trying. Still yet to turn on the machine.
Before this machine stuck in startup.
It will have some very random restart, which we are looking for the issue.
Now when trying to switch on the machine, after booted around 15 second it will...
One more question how to set it to wait long like ringing 8 times before entering fax ?;)
Trying to install the fax module for the machine.
But I am not able to locate where to install the fax module speaker.
Any help is much appreciated.
444214442244423
Is all in factory default.
Yes, this machine is for learning colour tunning purpose.
It original, it start to happen with I changed the [Heater Level Control] from level 3 to 4 due to a electric sound from the right panel. :(
I adjusted the [Max Image Density Adj] the value...
Model is KM C364e
All Consumable is at level 100% besides transfer belt at around 40%
My issue is the machine now is overtone cannot even tune down.
And at CE Mode Gradation Machine have a...
Set the M, K, Y to "-10" still produce overtone like 5% better maybe . :confused::confused:
Maybe you can check in CE Mode does the HDD is set to "Installed"
I once have this issue where it set to "NOT Installed" and Account Tracking verification is failed.
This is my first attempt to perform gradation adjustment in CE mode. Many things I am still learning but this few things caught my attention today.
I have followed the Service Manual as close as I...