Search:

oh yeah lol. I got my jobs mixed up XD

Is it only asking for A3/4 in Service Mode? I have had to back out and load paper in MP tray, set it to Letter, then go back to the Gradation Adjust in service mode. Don't know why.

Welcome!

Apparently it went well lol.


Dont mind me, I have the same issue and just scrolling through ;)

LOL No offense intended. This is where I'm at: (UPDATE: can't insert image apparently)


I've pulled all the gears on the transport unit and cleaned them, as well as the bushings around the...

You mean the registration rollers?

KM Bizhub C3110 from a very dusty industrial environment. Started coding 0094 Machine Failure back in Feb. Initially we cleaned the laser glass under all the img units and probably appeared to go...

That's what we are considering next. Replaced the 'cursors' but no effect. Giving tech the service mode options to check the motors and switches as well.

Good morning.

I am a Field Service Supervisor for a formerly small office equipment company that was bought out by a fairly large and established corporation the first of this month. I have 2...

UPDATE:

Tried cleaning the paddles in finisher, and covering the sides with tape to create a clean surface. Neither worked. We are ordering new paddles. The only other suggestion I've found is...

U001 exit maint. mode. U000 is print maint report.

U485 is a Service Mode option.

I service Kyocera and Konicas, as well as Canon (just started). For a Kyocera, a Taskalfa 406ci would be a budget buy, but it won't do larger sized docs. A 7052ci...

Hi, first post.

Yesterday I looked at a TA 6002i with DF-7120 finisher. Staple jobs are not performing correctly; every few sheets (3rd-5th page of 10+ batches) is offset about 1cm or so to the...