Almost positive it will only be the Laser if the black line has a different pattern and length every time. I still have to go with Moose and others after looking through all the posts that the DV...
Type: Posts; User: Greg Kinloch
Almost positive it will only be the Laser if the black line has a different pattern and length every time. I still have to go with Moose and others after looking through all the posts that the DV...
you need Sharpdesk. drawback is unless you use network scanner tool it will not directly scan to pdf only .tiff till you converted. good luck
Does it appear on the page or the drum if you run a 8 1/2 X 11 R ? (long ways). Not sure about this model as i am old school but some form of erase lamp?
BTW, ive been in and out of the copier biz since the ARM207, is the Phenoix 2 fuser any better or the same?
if not the drum blade or recovery blade it looks like the DV unit to me. either recovery or doc blade.
thanks everyone for the ideas. ive tried the sim and this machine has had 2 new refurb fusers put in. the web is not advancing which causes buildup. the only thing i can think of is for this...
hope someone can help. I have a Sharp MX-3115 that is not advancing the web. Was able to troubleshoot that the solenoid in the fuser unit it not actuating which does not allow the arm to advance the...
Crap!!!! my machine with the web issue is a MX-3115 Sorry folks. i was looking at a 3110 when i was typing. I am going to edit the post
hope someone can help. I have a Sharp MX-3110 that is not advancing the web. Was able to troubleshoot that the solenoid in the fuser unit it not actuating which does not allow the arm to advance the...