Search:

Definitely no OS13 support for an MFD released in 2004. The Dragon series ARM550-700 is basically 20 years old now.
You could try the MXM620N drivers, but I believe they're only supported to...

Run 62-14 to initialize the HDD Database after replacement.
Otherwise, you've still got a problem HDD if internal printing does not work.

Also check the Security Settings for Port Control, specifically HTTP/s haven't been disabled.
Test connectivity with your own laptop directly connected to the device.
I've also seen simply...

Send the print job to the device via 'Submit Print Job' in System Settings/Document Operations. This uses the Native PS3 Controller on the device.
If that works, and obviously Direct USB works, then...

If you're ever in a bind, you can successfully use MX51 dev in replacement of MX61 dev.
Done this heaps of times to use up old stock. Had zero problems in low and high volume environments.
Just...

Most likely a bad Sub DC Power Supply.
Fortunately this one is easier to replace than the Main DC Power Supply.

There's now a ARM supported driver for Win10 and 11 called the UD3L (Universal Driver 3 Lite).
It is similar to the UD3 driver, but has more features disabled. However, it supports ARM processors.

Some regions did not have the OSA Kits installed as standard on the CR4 series. On CR4.5 series they are pretty much standard install everywhere. If your device only shows OSA when Trial Mode is on,...

That's strange. The 300P, 300W, 301W, 303W & 304W are amazing devices which have proven themselves to be very capable of 500K+ in many environments.
Can't recall a single device not being liked or...

Mac OS13 Drivers have been on the Global Driver Site for several weeks now. They work well.

What's wrong with the Sharp MXC303W or MXC304W?
It's a Sharp build (not Lexmark) and is literally a CR4 in a Desktop MFD.
Sure, they're pricey, but they're fully licensed with everything onboard....

What version of firmware did you reflash?
I recall an old PCU Version 0601Z100 contained a fix for H3-02, which corrected a TH_US1 false temp code. Obviously, we're up to ICU Version 8.00 (PCU...

Error 20210001 is SharePoint Domain Name is wrong.
Drop the .org and use https:// at the start of the site URL.
Remove any MFA on the account.
Update firmware to latest version 0270Q100

These fans failing can be caused by damage to one of the Transport Drawer Connectors, the large black connectors on the back of the inside frame and the matching connectors on the back of the...

Any chance you've got a sample image?
How do internal test prints, fonts pages etc print?
How does copy, scan & USB direct print modes perform?
Checked drivers, firmware, reconnect LSU and MFP...

Common ideas would be a foreign object or paper tear-off stuck inside Fuser, caught between roller & thermistor, a possible DC Power Supply problem or the MFD does not have correct ventilation area...

This is 100% correct.
Should be part of a standard installation procedure.
Also add lp to the LPR Queue Name. This also helps in many installs.

No, new MFD & newer laptop combo won't need crossover. I'm just too used to saying it.

You absolutely can definitely browse into sub-folders on SharePoint from the MFD panel, provided your account has permission to access them. This is a SharePoint administrator issue, not the MFD....

First level of diagnostics on this symptom would be to remove the network cable, then bootup from main power switch.
Can you Copy and USB Direct Print when not connected to the client network, as a...

E7-93 can be caused a number of things actually.
You'll often find jam code PRI_Jam recorded at the same time, often with the paper stalled at the Registration rollers.



Drivers. Running...

Sounds alot like the energy save settings are set to Low Power Mode.
Change this to Fast Wake Up.
Low Power Mode, depending on the Firmware Version installed, can be a pain as the MFP Board...

You need to make sure the screw connecting the MXRB14 to the MXLC13N is loose, not tightened.
If this screw is tightened, the locking mechanism does not move full distance and causes the lever to...

Get the device Firmware up to Version 0250Q100 and PaperCut up to Version 22.0.6 (as a minimum) and it'll be good.
It resolves the OSA6 and Card Reader Emulation problem.

Just working through this one abit clearer.
Your device operates normally on network printing, has an operation panel which is only the white backlight, no GUI or display of any kind, and the touch...