Search:

Can you send it to me? I have search for it but the info I got was that it was only available in ebook! If you can send me I will thank you a lot.

No, only from bypass tray.
I will check all rollers again. What you say makes sense, I can´t figure where there is the delay but, i´ll do a new check to all gears and rollers.

Finally I have made the motor test and no fails
I have also done a full maintenance to transport module and inverter
Replaced the pre registration sensor and reconfigured all nvm values
The only...

I do not have service manual for Color C60

I will do that and give some feedback

Thanks

I do not have the codes for DC330

I called it MCU because of office printers but yes, i have replaced IOT PWB

61720

I think it can be developer K, but like you said, it´s necessary to test scanning.

I´ve replaced the bypass tray and pre registration sensor.

Can you share de repetitive defects sheets?

If you scan it remains to light or is only with copies?

Hi people

I need you help

I have a Color C60 that displays the the errors mentioned in title but, only when paper cames from bypass tray.

Paper is xerox original and SRA3 size. either it...

Hi

As promised here I am. Only last week I found out the solution for this error.

I have tried everything we have talked about and nothing solved. So I had to change my approach.

After some...

All engines

Hi

After some weeks this problem maintains

Replaced tray module pwb, reset to IOT NVM, full NVM reconfiguration with nvm factory values sheet. Also done software upgrade.

Nothing solved

I will replace tray module pwb and reset IOT NVM, and after that I will give some feedback.

Thanks

Yes, all print works in single sided are face down and there is not a single jam

Yes, from all trays, from A4 to SRA3

60125 If it helps, paper stays like this when it jams

Yes, and this machine is face down, and never jams with single sided print.

Hi

I need help with this error code 077-118 on a Xerox Color C60

I have replaced the transport module, inverter, right door and PWA MD IO and the Fuser.

Nothing solved, when it jams paper...

Hi

Enter service mode by pressing the home botton about 6 seconds and then select diagnostics botton.

Go to DC135

Scroll until you see chain 954-850 and 954-851

Select both and then push...

Hi guys i nee your help

I have a Xerox Altalink C8030 and i´m having a lot of paper getting wrinkled in the DADF. Also, the sheets that pass get on corner folded.

I swap the pickup rollers and...

Hi

I´m trying to perform the dc991 adjustment in a Workcentre 7830 but it always says resources needed. In tec manual it says nothing about paper. Can you help me with that?

Hi there

I need some urgent help.

I´m going to implement a network account software. So I need to activate the network account option.

The machine is a Xerox WorkCentre 5325

No You do not have! O tried to sell it in edoc. not pdf!!!!!

So @adriansto is not here to help but for winning money!!!!!!! :mad: