Search:

Humidity is 35% and temperature is 25 deg.
Also, the collars were replaced as well. I have attached the images of fuser unit and tray setting.

5662356624

Hi, if the lamps won't be able to maintain temperature, the machine will shown error code / or will come in Warming Up stage ?

Yes, the collars and heating lamps were changed as well. Can this be related to high humidity ? Machine is at 46% but paper might have retained some humidity because the usual relative humidity is 74%

hello everyone !

we are using konica c70hc and the toner is not sticking properly on one side only. This issue is coming with dark colours - like black and dark blue only. Lighter colours are...

new units

hi all

we have changed all the 4 drums, charging rollers, sponge rollers, developer, image transfer belt, cleaning blades of image transfer belt as well as of drums, but these streaks are not...

hi all

there is a strange issue with our kyocera 2040

after 10 prints, a black band of small horizontal lines is coming. please refer to the attached pic.

any guidance will be much...

Hi,
We changed second transfer unit, set second transfer pressure to high, CPM down but the issue still persists. The tech guy said that the problem cannot be resolved. 300 GSM SBS can run in 350...

Thanks for this detailed response. We will surely see into this, the process adjustment is not visible, I think it has to be enabled first using DIPSW. The technician earlier increased the pressure...

Thank you very much for the response.

We will try it tomorrow and will update you for sure.

Oh, but the problem is our job involves that particular media only. And we have already purchased few tons of it :-(
So, we don't have any other option other than changing the second transfer unit...

Thank you for your response.

Yes, the jitters take place at the same distance from the edge. SBS is indeed rigid, but it works well with our Konica C258. The tech expert who visited few hours back...

Dear Copytechnet members,

Greetings ! We are sure you must be doing alright :-)

We have recently purchased a re-conditioned Konica C70HC with counter reading of 1325321. We have replaced Drums,...

I am extremely sorry for posting it here. Thank you very much for the right direction. Posting right away and deleting this. Thanks again.

Dear people,

I need the service manual for konica c70 hc, can anyone please help me? There is already a post for this but the link is not working.

Please stay safe.

Thanks and regards,

Dear people,

I need the service manual for konica c70 hc, can anyone please help me? There is already a post for this but the link is not working.

Please stay safe.

Thanks and regards,

Hi there,

This seems to be the most intriguing and unique problem with our Konica Minolta C258. And, thank you for taking out time to read this. So here it goes,

Scenario:

We were printing...

We will again check the cyan DV and all other DV units today and will post result.

Thanks

We are using compatible toner and recently, the black OPC life was over, so we replaced the chip, and then it worked fine.

Thanks for this, we will try it today, however, we cleaned the whole laser unit. We will check for DV units today

Thank you very much for reposting :-)

Hello All !

We are getting a yellow-ish line towards the centre on our 12x18 prints. What can be the cause ? Attached screenshot

Printer: Konica C258
Paper: 12x18 300 GSM Art Card
DPI: 1200...

A Hearty Hello to all of you!

We have Konica Minolta C258, and recently Black Drum life has ended. And now, the printer is actually deleting all the 12x18 command through bypass. So, my question...

Hi there,
thanks for the reply.

Yes, I think the 270 GSM media is too much for this machine to handle, as we only print 270-300 GSM 12x18 art cards and that too in considerable quantities,...

Hi there,
Thanks for the reply.

We tried this on full red, full orange, full blue sheets, and the bands are still forming, on semi grays, this is coming too. Since the machine is on contract, and...