Search:

Yeah, I know of the prohibited part of the drum that is a factory set alignment. It's the two top black shims that bear on the developer unit. I don't want to take the top shims apart, but it looks...

Afanasy, while it's not normal practice to breakdown a drum, I have seen the aftermarket parts for the brush roller and lubricant bar. Taking the drum apart is no fun either. LOL

Have you any...

Anyone have any input on extending the drum life on a C1060 that primarily runs heavy weight, 11x17 label stock? Drums only last about a year and half, with maybe twice that based on color. Magenta...

Your not wrong! It was just unusual to see a clear band of toner resulting from a bad corona. BUT, here we are. :cool:

Morning!

First, I would like to thank everyone for their suggestions and guidance with this issue.

This morning I swapped the black corona with the magenta corona. Then sent a job for a quick...

HMM, on the drum itself? That I don't know. I would need to look closer at that and would prove it is closer to the source of the problem.

What I do know, is the band is visible on the ITB. I...

Yes, I already thought of the coronas. Got a set and a drum for the Magenta if all else fails. However, like I have explained, I swapped the drum out already to test the drum theory. Similar results....

Simply put, I already swapped the drum to see if it would do the same thing. I don't know if it was creating the same conditions, but the build-up on the 2nd Transfer definitely occurred. The band is...

OK, got the new Filter Box and broke down the Process Unit and completed a thorough cleaning, including the Dust Proof Glass (you'll know why I point this out by reading the rest).

54733

NOTE:...

In my opinion, educating the customer is always the best way to start. No, they won't always be able to grasp the problem or deal with an issue, but it gives them tools to help you understand the...

A stress test of the system is one way to start, but if you can, get a Preinstallation Environment (PE) to boot into and leave it on. If it reboots or shuts down on it's own in the PE, then it's most...

Yes, Sir! Go with the simple fix first. LOL

When I first saw the dusting throughout the unit, I made sure to clean out the inlets. The ITB was certainly distressed and the majority of the problem....

Well, as the supply chain unpredictability persists, the toner bottles in stock are sealed products direct from Japan? Not all of them, but definitely the magenta. The bottles are keyed differently...

A bit more information before I tear into it...

Quality is great. The only problem is the dusting/depositing of toner specifically with magenta. The machine is also requesting a replacement of a...

I anticipated that probability with the inspection of the older drum. I took the actual drum out of the assembly and saw that the magenta was packed. Auger was working correctly as I dumped the...

Anyone have an observation for this particular issue?

Let me set the stage, the ITB was a wreck. It was split/cracking on the front side and the Transfer Belt Cleaning Unit was certainly due for...

Just wanted to help conclude this thread for someone else's future problem searching for C-3903:

Replaced A50UM50600, Fusing Temperature Sensor/2 (longest of the two sensors) over a week ago now...

Ordered and replaced A50UM50600, Fusing Temperature Sensor/2, the one with the longer wire without too much hassle. Did the trick!

Spoke to soon...

Code C-3511 is cleared, proving that the power and lamps are working. C-3104 came up which was completely odd, so I the cleaned the PS24-26 sensors and hand turned the gears to...

Just to close this and maybe help add to the solution I found with a C-3511 code...

To clear the code I did the opposite, set it to 3-1, 1 and did a cold restart but this time went back into the...

That's what I figured. I went into Software DIPSW Setting and checked, set it to 3-1, 0 and did a cold restart. C-3511...

So I did the opposite, set it to 3-1, 1 and did a cold restart but this...

I have model c1060 with the C-3511 code... I am also posting this separately from another thread to address the c1060 directly.

Does anyone know if this code supersedes all others when starting?...

I have a post above with a c1060 issue, but I just wanted to verify if the c1070 is similar... I can only find A50UR70M00, Power Supply / 1 on the c1060 schematics. Did you mean that one, because the...

I have the sister model c1060 with the similar code...

Does anyone know if this code supersedes all others when starting? Codes are cleared and the fuser is disconnected from the drawer and the...

Yeah, I've been here before. You make a good point though, this was a multi-purpose machine running NCR, 20# White and Tabloid Label Stock. Because of the frequent jams on smaller cut sheets and...