Hi guys
The problem solved
It was HDD problem, mean while server was 00 but hdd had problem, i installed hdd as external hdd to a computer and run bad sector fixer on it, than installed on server,...
Type: Posts; User: Rohullah
Hi guys
The problem solved
It was HDD problem, mean while server was 00 but hdd had problem, i installed hdd as external hdd to a computer and run bad sector fixer on it, than installed on server,...
Commond work station connects to server, when sending print, printer not receive Data.
I say its hard drive because i have also a hard drive with IC 409, i have installed that and printer received...
Hi and thanks for replying
I found the problem is hard drive, but i dont know how to install ic 408 on new hard drive, should i install a windows on new hard drive and install driver on it or maybe...
Hello again
As i searched, problem is from hard drive. But I don't know how to install fiery 408 v2 on a new hard drive. Could you please help
[QUOTE=Phil B.;1670748] No errors, the machine was off for few weeks because of fuser belt, yesterday i got new belt and installed that and this problem found.
Also it does not print any controller...
Hi everyone
My konica c6500 have a problem, when i send to print, it doesn't process or print, it shows print waiting or rip waiting.also does not print controller test pages. Printer is ready,...
Hi Marsh2
You mean Conveyance drive board? Transmission board?
I have the same problem.
Hi guys
I have the same problem with c6500, anyone can help?
Based on manual, direct sunlight will effect on drum
It seems like OPC drum problem. Change drum or interchange with another color to check.
First you have to measure and adjust double side adjustment, mostly this happen in front side. If not solved, check the first feeding roller in right side of ADU, if the 2 roller pressure was not...
Try to charge dv unit with toner manually few times, i had this problem with 6500km. I had charged many times toner inside the dv, after that problem solved.
It was from magnet roller inside dv unit, the roller was charging more and spreading out. So when i changed the DV unit, problem gone.
This problem solved, It was DV problem
Thank you All
Thank you guys from everyone of you
My printer server hard drive damaged, waiting to receive new one. Than i will come back on this post.
Its a second hand , now its 45k, but maybe they have reseted before
Hi everyone
I have a KM c6500 wrinkling paper inside fuser.
It happens with 70gsm paper to 130gsm, 150gsm is better, 210 or more no problem. It happens in single side and double side.
The...
Toner is also genuine. I faced this after i printed a file that is 90% light cyan.
Hi phil
Drum and Dv are new. Not worked more than 3000 pages, belt is 30%
Hi everyone, i have a problem with c6500, after print 2000 cyan color file, cyan toner is charging too much, Dv unit cover, transfer belt are full of cyan. Cyan is coming out from backside fan. One...
Hi Splitcane
I have same problem, can you explain more? Its an old post, i hope you read this
Thanks
I dont know about this printer but i had same issue in c8000 and problem was from toner holder cover.it was very tight and toner not move easily.
Open toner supply door
Lose the toner holder,...
Thank you
tulintron
I have runed factory reset, i will check calibration and color profile
Hi everyone
Still I have a problem with konica C6500
The black output is gray
I have cleaned Dv and charged new Dv powder
Toner density sensor int...
Auto Gamma adjustment
Printer offset gamma...
Dear Synthohol
Can you send me this manual? I realy need that.
my email:info@kabulpen.co
Thanks in advance