Search:

We've used something similar here to reset admin passwords.

On the donor machine: System Control > Storage Backup > "User Register Information"

Then login through service menu and import. This...

We've had a couple with the same error code. Also Phoenix2 machines.

All of the machines helped with doing a Firmware update and calibration. 44-02, 46-74 etc

Although you have already tried FW...

Change PTC and
PTC Outer Holder (part: LHLDZ2540FCZ2)


Known issue here in Sweden.

Seen this issue a couple of times, with the same symptom where it ejects the toner.

BUT only on 50/60 models. Sometimes it helped with a new toner, though most of the cases it's been the sensor on...

Had to check another parts guide for a newer model. And you're right. DS4 can be find there.

Strange. I feel that he should have the same information as I.

And not that I know of regarding the Cl roller unit. It's only that unit itself.

EDIT: I can see that there's been updates on that...

Then I would check in with Sharp Tech Support there in US to see if possible to get a hold of a Cleaning kit. But I believe the damage has already been done on the pressure roller once it's started...

Need to ask also. What kind of prints is it that gets jammed?

Is it fully covered papers all the way to the edges?

And

By Wrap. do you mean a sudden stop or that the paper gets stuck on the...

I agree. I do however seen paper jam only caused during duplex with very weird results. This is one that helped.

And what previous users have said. The fusing units on these models could be...

Hi.

I'm not sure I've seen this issue, and not sure if this will help. But try this if you can.

On the Fusing unit, under it where the paper enters. There's a guiding metal plate than can be...

We're gonna compile a couple of issues we've had here in Sweden that might not be the most common problems. If you have any questions. Please take them through personal messages.
...